PDA

View Full Version : changing exhaust manifold *gasket*, how hard?



Jamie.
28-03-2006, 23:03
simpe as just removing them bolts bolting manifold to engine block/head and sliding the exhaust back a bit?

big hp
28-03-2006, 23:09
you mean gasket fella?

richy
28-03-2006, 23:09
undo the 10mm nuts holding it to cyl head and undo the mount lower down to the engine so it allows u to slide it back

Jamie.
28-03-2006, 23:12
yer the gasket big hp.

VIPERONE
28-03-2006, 23:30
use a ratchet 10mm spanner, undo all nuts remove downpipe and then just pull off studs, noting which side the metallic facenof the gasket goes :-)

big hp
28-03-2006, 23:35
As above.

Just do bolts up evenly.

BenR
28-03-2006, 23:45
pray none of them are seized.

big hp
28-03-2006, 23:47
When I put my supersprint on luckily all of them come off just fine.

Was certain they'd all be seized though. :lol: