williams turbo setup

[degm/williams]

Hi everyone im new, i have just bought a clio williams just for a drag car at santa pod, i was there this weekend at the fast show in my evo 6 and decided to buy a williams to do a turbo conversion, reason for this is i sold a 2.0l turbo corsa to my mate which is now running just under 300bhp and he was begining to catch me down the strip. My other mate had a williams with 171bhp which was pretty rapid so iv decided to try and compete against my mate with the corsa. Im using a T3 stage 3 turbo with external waste gate and will be doing lots of other mods but was wondering if any one new what sort of injectors and management i could use, also i will be selling all the seats and door cards if any is interested

[wavy]

welcome m8
sounds like your gonna have a lot of fun :)
you will find loads of info in here
if u cant find it ask
im sure some ppl know :)








btw dibs on ya parcel shelf n carrier if its a willy :lol: if ya do strip it

[VIPERONE]

bosch 802 injectors the green cossie ones, renault 21 turbo 2 bar map sensor,
t 28 turbo, oil lines to be tapped in bottom end, forged pistons to lower compression ratio
kevlar headgasket
pace intercooler/chargecooler
relocate the batery in to the boot
management provided via a remapped standar ecu.
should be good for 250 bhp+
uprate fuel pumps etc

[degm/williams]

when will every one be going santa pod next

[SyWill3]

Gunner you building your own turbo setup?

[Clio_GTT]

bosch 802 injectors the green cossie ones, renault 21 turbo 2 bar map sensor,
t 28 turbo, oil lines to be tapped in bottom end, forged pistons to lower compression ratio
kevlar headgasket
pace intercooler/chargecooler
relocate the batery in to the boot
management provided via a remapped standar ecu.
should be good for 250 bhp+
uprate fuel pumps etc

I'd agree on most of those apart from the Pace charcecooler, the pace cores are frankly piss poor, try one of these inline coolers, proven results http://chargecooler.co.uk/ bigger pre rads and proper fans.

[MAXIBOY]

only paid 600 notes for my charge cooler kit including pump rad and all pipes