View Full Version : Decat question
Slithers
27-03-2005, 21:12
On the decats that ppl have bought for their valvers or williams for that matter, does the exhuast end (as opposed to downpipe end) have a flat face on it or a a round flange coming out of it thats about 4mm long from the face of the mounting point of the decat, that slots into the exhaust?
cheers folks
Slithers
27-03-2005, 21:18
like this:
http://cgi.nickywitts.plus.com/uploads/decat.jpg
P.S: I laughed at Ktec racings feeble atempts at prventing ppl from saving the pictures from their website, not heard of print screen boys?, lol.
My blueflame decat has a recess for the manifold flange to fit in - then at the rear a 5mm proud flange for the tailpipe to slot in.
So yes heehee
Slithers
27-03-2005, 21:26
Would a flat faced decat make much difference you reackon?
KingStromba
27-03-2005, 21:26
How do yuo print the screen?
Slithers
27-03-2005, 21:28
How do yuo print the screen?
you press the button that says print screen, its on the bottom right of the f12 button.
press the print screen button on the key board...... :roll: Its then saved on your clip board ready to paste.
Slithers
27-03-2005, 21:32
press the print screen button on the key board...... :roll: Its then saved on your clip board ready to paste.
oops forgot to mention clipboard bit, is your decat got a flange or a flat face on it winston?
P.S it dont work when tryna grab stills from movies, ive tried many a time, think you need a video capture card to do that.
KingStromba
27-03-2005, 21:37
http://cgi.nickywitts.plus.com/uploads/11.jpg
Cool :D
I thought it was odd that ktec try to prevent you from right clicking on their site.... wonder why they have done that? Anyway im using Firefox so just disable javascript if i need to right click to save the images.... or if u know the shortcut ket... :)
Slithers
27-03-2005, 22:02
what was stromba looking at?!???!?
http://cgi.nickywitts.plus.com/uploads/11_copy1.jpg
KingStromba
27-03-2005, 22:04
LOL
****er
"Stromba in bum love shocker"
My supersprint decat doesn't fit properly. Am going to buy gaskets from Renault tuesday and see if they'll make a differance. Is on the downpipe end that it leaks. Although i've got the same gaskets back and front and i've since found out that there different.
If it makes no differance i'll order a k-tec stainless steel one as my supersprint one is mild steel.
Slithers
27-03-2005, 22:17
My supersprint decat doesn't fit properly. Am going to buy gaskets from Renault tuesday and see if they'll make a differance. Is on the downpipe end that it leaks. Although i've got the same gaskets back and front and i've since found out that there different.
If it makes no differance i'll order a k-tec stainless steel one as my supersprint one is mild steel.
does it have the 4-5mm flange at the zorst end on it?
KingStromba
27-03-2005, 22:22
http://cgi.nickywitts.plus.com/uploads/12.jpg
:wink:
Slithers
27-03-2005, 22:32
lol
KingStromba
27-03-2005, 22:33
http://cgi.nickywitts.plus.com/uploads/13_copy2.jpg
Just for you slithers :wink:
Slithers
27-03-2005, 22:33
might have to delete that one lol
Slithers
27-03-2005, 22:33
cant see owt m8
Slithers
27-03-2005, 22:34
now i can, lol
Slithers
27-03-2005, 22:57
http://cgi.nickywitts.plus.com/uploads/13_copy2_copy1.jpg
KingStromba
27-03-2005, 23:07
http://cgi.nickywitts.plus.com/uploads/12_copy1.jpg
:shock:
Slithers
27-03-2005, 23:10
I thought that pic of my car had been deleted
FlamingMonkey
04-04-2005, 12:43
My deact has the flanger, hehe on it, but I think mine was a Valver Williams onethat fit both?
btw..mine has the flange on too....but is also a devil item that fits both willy and valvers
just ordered my decat from lunner off cliosport.
Slithers
04-04-2005, 23:11
Im actually considering making my own now, when you look at it its like 2 connections welded to the end of a pipe.
And ppl pay over 60 quid for these :roll:
just ordered one of lunner for 35quid inc pnp.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.