PDA

View Full Version : Polishing components available... i think?



matt uk
25-03-2006, 18:13
in relation to this thread:http://www.williamsclio.co.uk/forum/viewtopic.php?t=9479&start=30

"i've got polishing barrels at work
work for rolls royce with stones in them
we polish meatal turbine blades for the engines

also can grist/sand blast over them before at anything up tp 100psi
so can get them really good


if i stuck them in there ther polishing stones would have them done in 1 hour

gonna do this to my turbines "



i have had 3 people message me now asking about polishing components

my answer to them at the minute is this....


well i havent actually done any yet!

i just had the brainwave!

in theory it should work becuse they come in as sandblasted aluminium and measure at 3.5um(surface smoothness)

when polished for 1 hour they come out at 0.4um which is about as smooth as a average kitchen spoon and they are really shiny and smooth

i'll have to look into it and use something as a tester first!

but it would definatly work if there used to polish rollys royce jet plane components

matt uk
27-03-2006, 01:21
right i've got a spare ph2 wheel so im gonna take this into work and see how it comes out

i'll post up pics when its done

Winston
27-03-2006, 02:43
Ave it!!!!!:P