would it fit?! [Archive]

Coops

24-03-2006, 21:57

only thinking but u know, individuality is the key!! :twisted:

http://cgi.ebay.co.uk/RENAULT-5-GORDINI-ALPINE-TURBO-ENGINE_W0QQitemZ4622883717QQcategoryZ122162QQrdZ1Q QcmdZViewItem

stew

24-03-2006, 21:59

im sure it could be made to fit! :wink:

custom mounts springs to mind!

what displacement are these bad boys!? 8)

Coops

24-03-2006, 22:08

not a clue, dont know out about this engine the keywords of 'alpine'and 'turbo' were used!! :twisted:

Clio_GTT

24-03-2006, 23:23

thats a gordini engine from the renault 5 gordini, most of the 5 boys use the R5 GTT block and gearbox with the gordini head as its a crossflow head which is much better designed than the gtt one.

not worth the hassle IMHO

ash clio gtt

24-03-2006, 23:26

maybe you could make it fit in the back but its a no no for the front as mounts with gearbox inline.

it is a renault 5 gordini turbo engine 1.4 litre 8v with crossflow head. can get big power out of them but parts are a behatch and can get the same power just as easy by turboing a 1.8 16v

Coops

24-03-2006, 23:42

what about turboing a meggi b'ended valver engine?!! cuz thats my real plan, was just havin a look at other options!! :twisted:

Clio_GTT

25-03-2006, 00:05

what about turboing a meggi b'ended valver engine?!! cuz thats my real plan, was just havin a look at other options!! :twisted:

low boost is easy, but when you start looking for more power, forged bits and pieces come into play $$$