PDA

View Full Version : Thanks to Mat Brown



white16valver
20-03-2006, 21:07
Bet you'll think twice about saying yes to doing that again... ;) LoL :lol:

stew
20-03-2006, 21:15
Mat get a dry bumming?? :shock:

LOL

:P

Lunner
20-03-2006, 21:25
i spat in it :wink: :lol:

white16valver
20-03-2006, 21:58
eeuw!! :shock: LoL

MatBrown
20-03-2006, 22:44
Hehe.
Kept me busy for a bit.
http://www.dazjw.eclipse.co.uk/mat/work/white16valver/
Onto the next one now.



Mat.

BRUN
20-03-2006, 22:45
no PAS ?........just asking as im investigating fan belt lengths lol

Lunner
20-03-2006, 22:49
looks liek a PAS rack to me :?

white16valver
20-03-2006, 22:58
Certainly have got PAS!

Unless it's another mystery sound from under the bonnet... :shock: LoL :lol:

BRUN
21-03-2006, 00:09
hmmm, your fan belt is shorter than normal, thats why i was asking

hadnt noticed the rack pic :oops:

dannyt
21-03-2006, 08:27
Looking good, if you dont mind me asking, how much did it all cost and what was done?

Looks like, cam belt, clutch, willy wide track and new engine mounts?

Danny

Lunner
21-03-2006, 10:35
Mat did it all, dunno about cost, guess you'd have to PM him for a price

Gav
21-03-2006, 10:39
i spat in it :wink: :lol:

lol dude thats fookin gross :lol:

Lunner
21-03-2006, 10:42
Had to do a double take on it, thougth mat had got my old 1.2 from the scrappers or something, looks almost the same what with the sunstrip etc

white16valver
21-03-2006, 14:38
Looking good, if you dont mind me asking, how much did it all cost and what was done?

Looks like, cam belt, clutch, willy wide track and new engine mounts?

Danny

Cambelt
Full Service (and a matbrown service is a FULL service! lol)
Clutch
Waterpump
All 3 engine mounts inc. uprated dogbone
Wide track - shocks front and rear, springs, bushes, ARB, wishbones, strut-top kit, driveshafts

Was a fair bit but a lot less than BB or similar would have charged! :shock:



The parts I got off Renault were:

77 00 838 095 - front shock £41.23 (x2)
60 01 025 842 - rhs wishbone £49.43
60 01 025 841 - lhs wishbone £49.43

77 00 785 788 (x2) ARB Bush (middle) £5.90
82 00 078 548 (x2) ARB Clip (middle) £2.90
77 03 035 027 (x2) Nut (middle) £0.75
77 03 002 116 (x2) Screw M8-2 (middle) £0.69

77 00 784 170 (x2) ARB Bush (w/bone end) £5.90
77 00 784 169 (x2) ARB Clip (w/bone end) £3.80
77 03 002 116 (x2) Screw M8-2 (w/bone end) £0.69
77 03 034 017 (x2) Nut (w/bone end) £0.36

77 01 470 089 - Strut kit £25.44 (x2)

60 01 025 828 - rear shock £46.86 (x2)

77 00 818 994 Engine Mount - Top £69.92
77 00 806 577 Engine Mount - Gearbox £25
77 00 849 715 Engine Mount - DogBone £27.25 (Hillpower = £50)

490.07 ex VAT
575.83 inc VAT

And I had the (wrong... LoL) ARB and Driveshafts 2nd hand, as well as the Springs, which were reasonable priced.

Other bits from the service were mainly small bits, bar the cambelt kit (£80ish?) and the clutch (£130ish?) iirc.

I'm sure I'm missing some stuff out though... lol

*waits for mat to come on* :lol:

MatBrown
21-03-2006, 16:18
Here's the full list of what i changed:

Rocker cover gasket
Air filter
Alternator belt
Water pump
Header tank cap
Clutch
Wipers
Cambelt and tensioners (Genuine)
Dogbone mount (Uprated)
Both engine mounts
Low temp stat + seal
Cooling system flush
Ignition leads (Magnecor)
Dizzy cap + rotor arm
Spark plugs
Camshaft oil seal
Coolant (Genuine)
Gearbox oil
Engine oil
PAS fluid
Fuel filter
Oil filter (Genuine)
Front shocks
Front springs
Wishbones
ARB
Rear Shocks
Driveshafts

Think that was about it. :P

Price varies depending on what you have done and i only do it on the side so don't expect a quick turn around but i treat them as if they were my own.



Mat.

white16valver
21-03-2006, 19:48
only a few bits then LoL

northy
22-03-2006, 08:52
looking great matt and mr valver.

Nice one

dannyt
22-03-2006, 09:06
Looks spot on, good work matt and cheers!