PDA

View Full Version : track rods



mutley
17-03-2006, 18:40
ive ordered them..... but what do they look like and how do i fit em!!?? :oops:

dannyb1986
17-03-2006, 19:12
you fit them, there is a nut that bolts one end into the hub, and the other end winds on to the steering rack, its just the nut that goes into the hub undo that, probly a 13mm, then another bolt that is at the bottom probly of the track rod 24mm, loosen that, then wind them off the rack, make sure you have your car tracked after or mark them in someway first, id advise a tracking though!!

MAXIBOY
17-03-2006, 19:22
also put some copper grease on the track end when you put it back on will make tracking the car easier for years to come

david932
19-03-2006, 23:18
when removing the old track rod count how many turns it takes for it to come off. when u come to put the new one on wind it on the same amount of turns, it'll keep ur tracking as close as poss :wink: