PDA

View Full Version : ive just won cylinder head and kent cams on ebay.



bigjim
14-03-2006, 19:32
as above, the one from infinicar on ebay. my plan is to have the head sent to benr to be fully worked with big valves etc and have his cams and pulleys fitted, wasnt planning on using the kent cams thought id sell them on ebay. does this sound like a good idea??

Martin
14-03-2006, 19:35
I'll have the kent cams....

bigjim
14-03-2006, 20:07
may use the cams with different pulleys, will wait and see. are the kent cams anygood?

Lunner
14-03-2006, 20:16
No they are shit, so sell them to me cheap ;)

J o n
14-03-2006, 20:40
thing is they are shit, i'd not let them near my car, their mere presence would break my car :lol: (mind you, a change in wind direction would...)

FlamingMonkey
14-03-2006, 21:25
Kent are mens cams, cause men are hard enough not to cry when they fail :P

Jamie.
14-03-2006, 22:46
i saw 2lives engine on weekend and saw the cam that broke...... i wouldnt use kent, not after so many ppls engines breaking.... 2live, craig etc. to costly a mistake to make imo.

stew
14-03-2006, 23:02
I think its more the problems with the pulleys than the cams!

Id not bother with bigger valves, not really worth it imo. just get replacement valves, little bit of headwork, and new pulleys. bargin cam setup then.

BenR
15-03-2006, 01:53
as said in the PM, i would go with a bowl port and not use the larger 33mm inlets.

As with the kents, it strange, i've seen the pullies fail, i've seen the bolts fail and i've seen the thrust bearing on the cam itself (at the other end) fail.