View Full Version : Cold Air Feed!
finally got off my arse n sorted a reasonable air feed in prep for the ITG comin end of the week!!
bought some ducting from halfrauds....bleedin 8 quid!! but i wanted it now and B&Q was bloody useless!!
wanted to keep the fogs so blanking plate it was and few tie tags n a bit if fiddlin later i got air!!!hehe!
intake in the bumper!
http://i14.photobucket.com/albums/a330/coopahstar/P3140044.jpg
round n up into the engine
http://i14.photobucket.com/albums/a330/coopahstar/P3140045.jpg
and up into the airbox!!
http://i14.photobucket.com/albums/a330/coopahstar/P3140046.jpg
the box itself, no more nasty pipercross!! :wink:
http://i14.photobucket.com/albums/a330/coopahstar/P3140047.jpg
its not perfect, the airflow aint gonna be smooth but as a compromise it'll do for now in till i decide to slag the beast when i get a run about!! :twisted:
MattyH16valver
14-03-2006, 19:19
Good job m8...I ended up buying the fog light air scoop, hav'nt got round to fitting it yet, lol. Putting standard box back in mine too, and ITG filter, waited over two weeks for the filter...still has'nt come :roll: Saw that ducting in halford the other day also, what diameter is it m8? You removed the old feed also? Matt
That looks like the ducting that is wank and tears really easy? Good job though I need to sort something similar for mine
MattyH16valver
14-03-2006, 19:24
That looks like the ducting that is wank and tears really easy? Good job though I need to sort something similar for mine
Might be better with some of this...
http://www.motor-world.co.uk/show_prod.php?prod_id=7717&PHPSESSID=86ac84ab3b0d92fa5d153c0282e50398
pretty sure its not that sh*tty alloy stuff
Clio_GTT
14-03-2006, 21:23
http://www.samcosport.com/duct.asp
thats the proper job for it
tip for the day..............dont put ur hand over the hole while someone revs the engine lol
i put my hand over kevs at pretty much the same time he gave the acc pedal a good boot. lol..result......1 sucked flat air feed pipe, severe loss of power.
Putting standard box back in mine too, and ITG filter, waited over two weeks for the filter...still has'nt come :roll:
well the ones ive been ordering, some have been despatched today, so if you still dont get one in a few days mate, gimme a shout and ill sort you out with one
sorted 7 for people off here now in the last few days and a 172/182/Cup one for someone on Cliosport
Scott-16v!
14-03-2006, 22:08
http://i14.photobucket.com/albums/a330/coopahstar/P3140044.jpg
lol, did you slip when using a drill at some point?!? :wink:
Looks allright, need to get one sorted out on mine, don't fancy a big hole in the bumper though :k
MattyH16valver
14-03-2006, 22:24
well the ones ive been ordering, some have been despatched today, so if you still dont get one in a few days mate, gimme a shout and ill sort you out with one
sorted 7 for people off here now in the last few days and a 172/182/Cup one for someone on Cliosport
Well....I ordered one of Motorsportworld on the 27thFeb so thats over 2 weeks now. I've contacted them twice about it and the last time was last week and they said it would be here by last monday :roll: So....if it is'nt here tomorrow i'm gonna cancel the order and have one off ya m8. :D How long does your delivery normally take m8?
Looks good coops!
That looks like the ducting that is wank and tears really easy? Good job though I need to sort something similar for mine
It is! LOL
I had some of this on my old clio. Fooking teribble.
i wrapped mine with duck-tape to keep it together.
I'm still undecided on whats the best ducting for cars....but i rate the stuff from demon tweeks. works well
nah the bumper had them holes in when i got the car!same on other side n all so guessin sum1 mite of had big gay fogs on it at some point in the past!! :shock:
the ducting is fine so far, and shoehorned it over the inlet for the airbox with a screw driver n it didnt rip, i'll keep an eye out for stone chips over next few weeks!!
all i need is the ITG now and am laffin!
oh ai n i think its 70mm diameter, just fits the blanking plate hole in the bumper! 8)
Cool looking good, simular to mine:
http://homepage.ntlworld.com/peterj.jones/My%20Clio/Air%20Duct.jpg
Be careful that the pipe goes in enough so it dont catch on the wheel on full lock..
Will have to try the hand over it to see what happens :wink:
arj256 - you got any inside arch pics of your air feed??
looks sweet!
8)
Well....I ordered one of Motorsportworld on the 27thFeb so thats over 2 weeks now. I've contacted them twice about it and the last time was last week and they said it would be here by last monday :roll: So....if it is'nt here tomorrow i'm gonna cancel the order and have one off ya m8. :D How long does your delivery normally take m8?
they seem to be sending them out the day after ordering now mate, so should only take a few days once i receive payment
MattyH16valver
15-03-2006, 17:25
recieved it today m8...cheers anyway :D
I was thinking about doing this, but what happens to the filter in driving rain? Won't it get pish wet through??
all i've noticed was a touch more vapour otta the exhaust, never bothered checkin the filter tbh, sure it'll be reet n shud be enough latent heat in the airbox after runnin to dry it out! tho does say the glue dont cope to well with water so u have to clean/wash it with petrol!! :shock:
Does the car go better than it did with the piperx ?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.