View Full Version : lowering
benjer182
13-03-2006, 21:07
i bought a 1.2 oasis of a mate last week and it has turbines on and is booked in to be lowered but it has turbines on 195/45/15 how low can i go i know its a 1.2 but i still have the 182 engine can i go 35mm all round any help will be greatly appreciated
Mk1 clio i presume?
Not sure what you are on about with the 182 engine
Should be able to drop it 55mm easily
benjer182
13-03-2006, 21:17
that is a fat bit of dropige i have a 182 engine is wot i ment and mk1 yes will that rub with peeps in the back
www.lunner.co.uk
RSi has same arches as 1.2 running 15's with 195/45 tyres and i've had 4 perople in there, only thing that scraped was the exhaust on teh ramp outa the carpark lol
You will be fine with 35mm as the turbines are the correct offset for a clio.
You could probably get away with 55mm if you dont mind your front arches :wink:
Clio_GTT
13-03-2006, 21:31
you have a 182 engine in your mk1 1.2 ? :shock: :shock:
Matt_16v
14-03-2006, 16:52
I went 55mm on my 1.2 Biaritz and that was on turbines with 195/45 R15 tyres. Sat perfectly and handled quite good too, allthough i did quite quite a lot of scraping on the rear....
benjer182
14-03-2006, 19:23
i have the engine but it aint in
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.