PDA

View Full Version : elec windows



Gav
11-03-2006, 21:03
Me and Dancliovalver were swapping our windows round today and now [both on pass side] everytime we press it to go down the side clip comes out and the windows go down slanted

does anyone know why the windows wont go down straight,?

Gav

MatBrown
11-03-2006, 21:10
There is a guide on the glass that lives in the back runner which sounds like it's not seated properly.



Mat.

Gav
11-03-2006, 21:11
legend, cheers matt will check :D

Dancliovalver
12-03-2006, 01:07
i think we tried that one matt, and i know one on gavs broke lol, but will try tomorrow!!

BRUN
12-03-2006, 01:11
its only that guide thing that straightens it up, it has to be that really

ive just done my windows and mine work fine lol

Dancliovalver
12-03-2006, 01:12
kool cheers mate, will definatly have a go tomorrow!!!

BRUN
12-03-2006, 01:22
did you have any problems with any of the clips at the bottom, the one on my drivers side was a right cunt.........took ages to get off..........did my passenger side completely, stripped, changed glass, put back together, in the time it took me just to get the clip off the drivers side window

Dancliovalver
12-03-2006, 10:29
lol i think the one at the bottom on mione snapped, would it be best to get another or will it hold without?? any alternatives?

Gav
12-03-2006, 15:22
ditto one of mine snapped also

BRUN
12-03-2006, 17:51
it probably would hold, but if the glass did come away and the motor slides that frame up and the glass stays still, at best its gonna scratch it, if not crack it........

would be worth gettin a new clip IMO

jwarren2k2
17-03-2006, 16:16
my runner thingy on the back of the drivers window has broken off too, i found one half of it inside the door! The reason i took the door apart was cos the window popped out of the runner, so i had to put it back in. All i need to do now is get a new runner guide (little plastic thing) to hold the window in to stop it from going down slanted! Does anyone know the part number from renault? Or do u think i could superglue the half i found to the window and that would be enough to hold it in?

Cheers guys! :D

BRUN
17-03-2006, 18:47
guide clip

77 00 838 242 SLIDE D/GLASS ME 1.72 ---3 x 1

rivet for it

77 03 072 272 RIVET DR/GLASS ME .32 ---3 x 1

jwarren2k2
18-03-2006, 18:27
cheers brun, appreciate that!! :D

im guessing they're not too expensive together? under a fiver?!

thanks again!