View Full Version : What other cars do clio alloys fit on?
Slithers
09-03-2006, 20:49
I think they fit saxo's and astras but i cant remember, can anyone enlighten me?
Cheers
Matt
Clio_GTT
09-03-2006, 20:58
Nissan pulsar GTiR, some vauxhalls BUT the offset will be wrong
they wont fit ANY citroen, or ANY ford
they will go on most vauxhalls and the offset wont be that far out, aftermarket wheels for vauxhalls are usually a 38 offset, the Renault OE offset is 36, but, the OE wheels are not as wide as aftermarket versions so as above they might not fit as you would like
they have the same PCD and roughly the same offset as Rover and Honda aswell, just depends if the hub bore is less than 60.1mm which i think its is on most cars
^Couldn't of said it any better myself^
Fit Veedubs too :wink:
ah yea, forgot about those
it helps when you work at a place that sells alloys :) , learn all the fits pretty quickly
they wont go on any Pug either, and not on a Fiat unless 'wobbly' bolts are used
clowo16v
10-03-2006, 02:30
Going from a 38 to a 36 offset shouldn't cause any problems as it will just mean the wheel is 2mm further out. However going from a 36 to a 38 offset could cause the wheel to rub on the struts/calipers depending on width.
See ya
Matt
Slithers
10-03-2006, 08:42
So in a nutshell, they fit some vuaxhalls and some VW?
Can someone tell me what cars from these makes they fit?
Cheers
Scott-16v!
10-03-2006, 10:33
mk2 & mk3 golfs?? apart from the centre bore is different.
toyota starlet and glanzas
Justin..
10-03-2006, 18:06
wobbly bolts? what are they
Justin..
10-03-2006, 18:20
ah yea, forgot about those
it helps when you work at a place that sells alloys :) , learn all the fits pretty quickly
they wont go on any Pug either, and not on a Fiat unless 'wobbly' bolts are used
them
they are a bolt where the tapered edge near the head can move about 1mm either side of the threaded part
only really needed for Fiats, dont think anything else needs em
I've seen 16v Phase2's on Astra Vans, Nova's and.. wait for it...
Skoda Pickups..
:roll: :cry: :lol:
ah i see! lol... wobbly bolts. sounds safe
I saw phase 2's on an old Nissan once - old skool though - looked suprisingly good!
Fit polo's too - eh Winnywinnywinston!
saw a mk2 golf driver on turbines in hillsborough today!looked mental, cuz noticed wheels first then looked at car and was like oh, tungy valv........no its a fahookin golf!!!
saw a mk2 phase1 clio on willy wheels in sheffield n all first thing this morning, what a waste, it was a blummin 1.2 n all. i want willy wheels, aitn enuf for the mk2 owners to start theiven em!! :evil:
saw a mk2 golf driver on turbines in hillsborough today!looked mental, cuz noticed wheels first then looked at car and was like oh, tungy valv........no its a fahookin golf!!!
saw a mk2 phase1 clio on willy wheels in sheffield n all first thing this morning, what a waste, it was a blummin 1.2 n all. i want willy wheels, aitn enuf for the mk2 owners to start theiven em!! :evil:
Mk1 silver 172s look soooo good on anthracite willy wheels...
If I can get our lass a car i'd do that 8)
bass_direct
11-03-2006, 10:46
toyota corolla same pcd and offset
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.