changing/removing dash light bulbs and removing abs fuse

[Jamie.]

how do u do this? as i may just remove my abs light bulb and go to a back street garage who wouldnt know whether the light should go on and off with ignition!!!!

and which fuse is the abs one, to get rid of this shit once and for all!

[1fast6]

and which fuse is the abs one, to get rid of this s**t once and for all!

Look in your manual mate lol. Fuse diagrams in there.

[Jamie.]

and removing the dash and the bulbs?

[1fast6]

Remove top dash. there are 5 screws.

There are four screws holding the main dash dials in. Two are clearly visable at the top, two are at the bottom and you need to remove the plastic panel below the steering wheel to get to them.

Once the scews are out, you can pull the dials up a bit and get access to the ABS bulb. They are the smaller black plugs on the back of the dials. There are lots of them :) Twist it and it will come out along with the bulb.

Suprisingly difficult to describe lol.

[Coops]

n once u undoen them four screws, ease the dails out gently,if u just pull em u can rip out the speedo cable n **** the clip on it, right git!! :oops:

[white16valver]

Voice of experience? ;) lol

[Coops]

:P