PDA

View Full Version : ecu question..



bass_direct
04-03-2006, 12:37
Somebody's got a chipped ecu they've got for sale...

it's off a 19 16v..

numbers on my ECU..

siemens S101715103b

HOM7700851741



Their numbers..

siemens
S101715101 c

HOM 7700857528




So will it fit :roll:

Rich
04-03-2006, 14:39
yes they all fit the same

bass_direct
04-03-2006, 16:21
ok cheers mate.

BRUN
04-03-2006, 18:53
siemens S101715103b - didnt think this was a valver ECU code ?

ben_j
05-03-2006, 00:00
the R19 gearing is different therfore would produce its power at different rev ranges accordingly. so would a r19 ecu not be a correct map even tho it will fit?

bass_direct
05-03-2006, 11:02
siemens S101715103b - didnt think this was a valver ECU code ?
I dunno? that's the one on my car! (rsi with valver lump)

BRUN
05-03-2006, 13:22
are you sure ?

valver ecu is either S101262105 or S101262101

rsi ecu is S101714101

BRUN
05-03-2006, 13:23
found it, yours is a R19 1.8 16v ECU

bass_direct
05-03-2006, 14:11
cheers mate, good stuff, so i'm guessing it won't matter if i change it to the other chipped ECU?


what differences are there for 19 ecu and clio? my clio goes upto 67 on the speedo in 2nd gear if that helps llol

VIPERONE
05-03-2006, 14:30
IT DOES MATTER!!!!!

------------------------
ive had a 19 16v that wouldnt work on my valver(ph 2)

ive had ph1 16v ecus not work either.. strange williams ecus work on anything!

ben_j
05-03-2006, 16:43
ah but is your 16v conversion from a clio or a 19?

bass_direct
05-03-2006, 20:44
it's an M reg phase 2 clio 16v engine..