PDA

View Full Version : 4" stainless steel exhaust



bass_direct
03-03-2006, 13:51
can be seen here..

http://www.mycgiserver.com/~bassdirect/clio%20back2.jpg

it's a peco stainless steel and it's the rear box and the u shaped pipe thingy so it'll go straight onto your mk1...


for all mk1 clio's..

4" outwardly rolled, looks wicked..

Looking for £60 collected... from romford, essex



this pic shows the tailpipe design but this ones a powerflow on my old car
http://www.renaultsportsclub.com/mkportal/modules/gallery/album/a_198.jpg

u33db
03-03-2006, 17:22
can be seen here..

http://www.mycgiserver.com/~bassdirect/clio%20back2.jpg

it's a peco stainless steel and it's the rear box and the u shaped pipe thingy so it'll go straight onto your mk1...


for all mk1 clio's..

4" outwardly rolled, looks wicked..

Looking for £60 collected... from romford, essex



this pic shows the tailpipe design but this ones a powerflow on my old car
http://www.renaultsportsclub.com/mkportal/modules/gallery/album/a_198.jpg

What mk1 is it for? RSI's/16vs use a bigger bore than others...?

bass_direct
03-03-2006, 23:17
change of plan mate, i'm keeping the exhaust...

it's on my rsi btw.