dog bone mount valver

[matt uk]

how easy is it to change th dogbone mount? on a valver (95)

is this something i could do myself easily enough?

gear stick moves around alot when under accelartion and deaccelartion so it quite obviously the mount is the problem

can get one from motorfactors tomorrow and attempt it myself if thats a wise decission?>

thoughts....

[BRUN]

ive seen it done and it looks very easy to be honest

[matt uk]

something i can do myself then?

i'll just be armed with a small toolbox and a dogy jack 8)

[Clio_GTT]

easy, jack the car up, whack it on axle stands, undo the 2 bolts holding it to the car, take it off, put the new one in place, a bit of higgldy piggldy lining everything up, then bolts back in and do up, job done :D

[FlamingMonkey]

Yep very easy managed to do mine myself easy enough as above really

[matt uk]

will be attempting this in an hour or so...

will let you all know how it goes

[Coops]

good luck matey! easy as pie so no worries am sure!

too fookin cold where i am, was gonna raise rear suspension but chickened out cuz i cant even see out the patio windows its so icy/misty!! :(

[matt uk]

yes coops it was very cold here in the midlands
but anyway ive done it!

£11.49 for the mount from my local PCS motorfactors

gearbox is alot better
still slight movement but i think thats just the linkage.

next up is a new alternator belt as this one keeps slipping and it getting embarrassing

worst of all when doing a 3 point turn the power steering makes it squeel like a wild pig

[Lunner]

Bah cold int eh midlands, been outside working all day, whats bad is when you are changing a clutch cable and pedal,and ahve to do everything by feel, but your fingers keep ghoign numb every 15 mins lol