View Full Version : ISCV Cleaning
need to clean my ISCV today before fitting it, where do i clean it? where do i spray the wd40 or whatever it is i need to spray
also...what do i clean it with?
FlamingMonkey
01-03-2006, 12:03
Carb or Brake cleaner ideally
and which part do i clean?
FlamingMonkey
01-03-2006, 12:06
err the tube bit at the bottom, the only place you can clean, don;t think you can clean the connector at the top?
Just spray loads of carb cleaner in, you will see the shite drip out, let it dry though a little before fitting I would of said
spray a bit of wd40 in there after n all, i found carb cleaner disloged stuff so it got stuck elsewhere! so wd40 and work the little shutter down the pipe back and forth with a cotton bud to make sure the bugger slides smooth as a pint of baileys down a freshly waxed bikini line! 8)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.