PDA

View Full Version : Missfire/idle problem clio 16v



clio-16-valver
25-02-2006, 13:45
Hi

My car has developed a missfire problem on idle and say after traffic lights. It also holds back and then suddenly goes forward. At idle the car will be fine for say 30 secs but then the revs start to drop to 400-500 rpm for 10 secs then back to 1500 rpm. I have changed the iscv and this has not made any diff.

I also changed the coolant temp sensor which seems to have got rid of the missfire but at the same time has made the car hard to start from warm (will almost fire up but then goes to turning over for like 20 secs) The car also seems to idle way higher say 1600 rpm with the coolant temp sensor.

The rolling road yesterday said it was running really lean (118bhp!) and its been modded aswell!

Whats up with the car people?

Laine_16v
25-02-2006, 14:31
im thinking your lambda sensor is up the duff

BRUN
25-02-2006, 20:28
me too, sounds like the lambda

clio-16-valver
25-02-2006, 22:21
Well I changed the lambda sensor and the coolant temp sensor today (Both the probs have gone)

:D

Laine_16v
25-02-2006, 22:25
:D , nice one no doubt your lanbda sensor was broken.

measor
26-02-2006, 18:44
Un-bolt the the air inlet valve and give it a wipe and spray a bit of wd40 in it, done the trick for mine as I was experiencing similar problems.
Hope this helps

measor
26-02-2006, 18:45
Ignore that, didnt realise youd got it sorted :oops:

clio-16-valver
26-02-2006, 19:33
Hi

May try that just for the heck of it.

Where abouts is the air inlet valve?

diggs04
28-02-2006, 22:13
on the drivers side of the inlet manifold has a multi plug connected on it.

BRUN
28-02-2006, 23:25
if by air inlet valve you mean idle valve, its on the passenger side of the inlet not the drivers