16v / Williams body panels [Archive]

neilc

22-02-2006, 12:54

been looking at www.sel-imperial.co.uk

and looking through the panel list I looked at the rear arch ones

www.sel-imperial.co.uk/partimages/2166L.jpg

www.sel-imperial.co.uk/partimages/2166R.jpg

could these be used for the 16v and Williams as were ours flair out those one stop etc ??

northy

22-02-2006, 12:57

that picture looks like a non williams / valver wing mate

It will fit but they wont look all that good.

clowo16v

22-02-2006, 13:15

Go to your local auto factors they'll be able to get you the correct one for about £25-30 a side.

See ya

Matt

neilc

22-02-2006, 13:56

So they can still be got hold of then.

When I spoke to a couple of body shops they said all I could do was cut out the rust a patch it back up as they didnt make replacment arches for the 16v / Williams

McPikie

22-02-2006, 13:58

Excuse my complete ignorance, but what's the difference?

big hp

22-02-2006, 14:07

="neilc"]So they can still be got hold of then.

When I spoke to a couple of body shops they said all I could do was cut out the rust a patch it back up as they didnt make replacment arches for the 16v / Williams

Still available from Renault, I bought one just before christmas.

James Clio 16v

22-02-2006, 14:16

="neilc"]So they can still be got hold of then.

When I spoke to a couple of body shops they said all I could do was cut out the rust a patch it back up as they didnt make replacment arches for the 16v / Williams

Still available from Renault, I bought one just before christmas.

How much was it mate?

Cheers

James

big hp

22-02-2006, 14:28

Just a few £ short of £400 IIRC but I got it a bit cheaper as I bought a door as well.