PDA

View Full Version : 1.8/2.0 inlet manifold



Swervin_Mervin
21-03-2005, 18:08
Is one significantly bigger than the other?

Noticed on JB's Willy 1 that there seemed to be some eoom between his manifold and the cross member, but fark all on my valver.

Winston
21-03-2005, 18:12
Think there the same?

My willy 3 and valver one were the same

j3ned
21-03-2005, 18:15
the williams manifold and the 16v 1.8 are exactly the same - no difference at all

Swervin_Mervin
21-03-2005, 18:16
So why the hell does my dipstick almost touch the cross member and yet the one in JB's willy 1 is probably 1-2inches fron the cross member?

Does the head sit further forward or summat?

Winston
21-03-2005, 18:19
because 2live has a megane bottom end, so the dip stick is in abit of a different place.

dannyt
21-03-2005, 18:21
i would say it's to do with the crash perhaps Mike?

Swervin_Mervin
21-03-2005, 18:21
Soz, not 2Live. Johnny Brown aka Irish Nut.

Winston
21-03-2005, 18:25
oppps....

Your dipstick tube could be bent forward?

Swervin_Mervin
21-03-2005, 18:26
It's not just the dipstack though. The whole lot just seems closer to the x-member. :?

VIPERONE
21-03-2005, 23:52
irish nut has had a bump iirc

Swervin_Mervin
22-03-2005, 11:07
If you check THIS (http://forum.cliosport.net/display_topic_threads.asp?ForumID=13&TopicID=149119&PagePosition=1&ThreadPage=1) thread on CS you can see what I mean. Irish Nuts is like Wonstons and Rhino16vs. You can get you hand between the manifold and cross member.

Mine is like _simon_'s in that you can't!

Any reason do you reckon?