PDA

View Full Version : Ide *sunroof*



VIPERONE
15-02-2006, 16:49
Send an oe sunroof to a perspex/plastics place... get one made up same spec/shape ( prob a bit wider with custom seal ).. prime it spray it fit it..

or roof vent it, rally scoop it lol. wonder why this hasnt been done... weights can be added to it for shell ridgidity

Swervin_Mervin
15-02-2006, 16:58
Mark R has the filled in roof with vent/scoop.

Lunner
15-02-2006, 17:43
Its the frame more than anything that give the ridigity, main reason i'd guess is the gians are that small.

Can't nuse it as a rally vent as its too far back, needs to be at teh front so the air blows onot the drivers, as anyone who has been on a track will know ;) you get ****ing hot, even if you were cold when you got in the car.

Mark Ritchspeed glued a sheet of metal over the opening on the underside of the roof, and then filled and sprayed over the top, to remove the sunroof, and put the strength back inot the roof