View Full Version : Remapped
Well its done, any guesses on power?
Gunner you can't play :P
VIPERONE
07-02-2006, 21:06
ok :-)
at the wheels or fly?
I'd guess 163 atf or 131 atw
FlamingMonkey
07-02-2006, 21:10
140 at the Wheels
Well i've got at fly and wheels so choose whatever you want.
I'll use waynes loses though as his rollers seem shit hot and no reason to doubt his transmission loss.
FlamingMonkey
07-02-2006, 21:17
I don't believe waynes at the fly figure actually, seems far to low IMHO, but hey what do I know :P
I'm changing mine to 137 at Wheels 8)
hey you've got an adavanatge as yours has already been on his rollers....now you're squeezing my guess! :wink:
If waynes ATF figure is low then i'm over the fricken moon 8) :wink:
I'm very happy as it is.
well come on man, for the love of god tell us!!! lol
Ok its..........................
Clio_GTT
07-02-2006, 21:25
50 bhp atf ? :lol:
Mods are......
Supersprint manifold
De-cat
Magnex System,
Green replacement element.
Ok its coming........
VIPERONE
07-02-2006, 21:28
one hundred and s *****chokes....
Laine_16v
07-02-2006, 21:28
omfg get on with it :P
171.9 @ the fly
151.3 @ the wheels
I'm well pleased and Wayne was surprised as well as it made 163.9 before map :shock:
Pulls a lot harder everywhere now, definately money well spent. I'd recomend anyone to do it and to definately use Wayne @ Chip Wizards.
nice what did you have the limiter set at? Mines at 7.1k but I usually change just before 7 as it feels like it's peaked....
VIPERONE
07-02-2006, 21:33
graph please.
did you wonder what was going on when i arrived this morning?
nice what did you have the limiter set at? Mines at 7.1k but I usually change just before 7 as it feels like it's peaked....
7.1k same as yours and as recommended by Gunner.
Although Wayne did just do it to that anyway.
... see, told ya... :wink:
shit hot gains there mate and by the sounds of it a quickun already! now for cams... get to that 190 mark :wink:
graph please.
did you wonder what was going on when i arrived this morning?
I'll have to get it scanned in tomorrow, my scanners broke.
Wayne said to me heres trouble then you walked in LOL
I'd already said you said you'd try and pop in at some point. Nice to meet you, even if it was only for a couple of mins.
... see, told ya... :wink:
s**t hot gains there mate and by the sounds of it a quickun already! now for cams... get to that 190 mark :wink:
I traveled 187 miles each way to see Wayne, glad I did and thankyou everyone for banging on about him, I will from now on too 8)
Hmmmmmmm Cams not sure yet. Wayne suggested vernier pulleys on standard cams and advance the inlet, especially seeing as its a quicken already.
Scott, you should be out hunting 182's about now mate... although it may be prudent to go for cars that will challenge you now :lol:
what did rob's and gunner's make at waynes?
someones happy?????
no leaving me behind on saturday! plus i will have the sat nav anyway :wink:
Pah 182's used to do them before manifold, let alone map. Like you say I want something that'll give me a challenge.
Wait till 1?2 owners see this, i'll be called a liar, RR's miles out, blah blah blah.
VIPERONE
07-02-2006, 21:44
what did rob's and gunner's make at waynes?
mines never been !..
next week.
what did rob's and gunner's make at waynes?
mines never been !..
next week.
eh thought you had your done the other week?edit* ah ok...
someones happy?????
no leaving me behind on saturday! plus i will have the sat nav anyway :wink:
Over the moon TBH mate.
No won't race off, want to try and keep it clean, or cleanish so theres not much cleaning to do for pics of fastest williams on the day :P
VIPERONE
07-02-2006, 21:48
hp how long was he actually mapping your car for? and what fuel had you in ??? as you will have to use it for ever more lol
Pah 182's used to do them before manifold, let alone map. Like you say I want something that'll give me a challenge.
Wait till 1?2 owners see this, i'll be called a liar, RR's miles out, blah blah blah.
thing is mate I'd personally say his fly wheel figures are out... 151ATW is near 190 by my calculations :shock: which sounds about right, as 155 was 196 at the mini sport place... nice 8)
2hrs mapping on the RR, rest was getting it sorted ready to map. Plus sorting another car out. He did say to me allow 4hrs.
I don't mind, was watching dvd's etc and was very well looked after.
I'll see what I get at Hill power on sunday.
TBH i'm not bothered by figures, just how it drives on the road, and it pulls very hard all over. thats whats important.
I wish people would'nt do threads like this lol Makes me want to go out and get cams then straight to the chipwizard! :P
craig100
07-02-2006, 22:01
where is this mappin place? gunner u will have to give us abit off advice what else i can do to mine on thurs if u would be so kind lol
I wish people would'nt do threads like this lol Makes me want to go out and get cams then straight to the chipwizard! :P
PMSL, Cams schmams, can't see the fuss. you've got a quicken as it is.
where is this mappin place? gunner u will have to give us abit off advice what else i can do to mine on thurs if u would be so kind lol
Milnrow, Rochdale.
VIPERONE
07-02-2006, 22:05
what fuel you have in for remap?
craig100
07-02-2006, 22:07
think cams are my next move,how much am i lookin at?
Tesco 99 ron. Always use it.
nice one big hp! cant wait to get mine finished :D
think cams are my next move,how much am i lookin at?
alot! lol Depends on where you go for fitting but with verniers/belts/remap etc I payed £1100....ish
MatBrown
07-02-2006, 22:31
Tesco 99 ron. Always use it.
That might have something to do with it.
Mat.
i cant get that stuff anywhere!! bloody tesco near me aint got it, best they got is 97 ron super! :(
good work on the remap bighp matey! shud be flying now!! :twisted:
martin, i know what you mean, am still copperin up for fuel after the rebuild n i want cams n headwork n remap n everything now!!!oh n a meggi bottom end! :P
gibbo any news mate, when u RR?i may have to give it a miss cuz of house huntin plans :roll:
22bhp from those mods is very impressive, very good gains. sounds like chipwizards is the place to go for remap after other mods have been done first. now should i sell or should i get those cams/pulleys and chipwizards remap :twisted:
lol.....another satisfied customer.
this is the only 2 live recommended ecu guru..........hehe......i will be going to see him hopefully soon myself, again, to finish off the most recent additions lol :wink:
FlamingMonkey
08-02-2006, 09:49
Mine made less than that, I got 148 at Wheels, and I have Cams...lol
We shall see on Sat :twisted:
Mine was mapped on Optimax
VIPERONE
08-02-2006, 09:59
i'd say it was down to the fuel lol. and his expertise!
FlamingMonkey
08-02-2006, 10:08
i'd say it was down to the fuel lol. and his expertise!
I asked him about it when I was getting mine mapped he said Optimax is good to use for the cleaning shite in it, but mentioned nothing about it having to run on it, I've run mine on anything thats available if I can't get to neareast shell
ye the fuel probably added around 5bhp
thats judging from a test carried out on 5th gear on the new 2ltr golf.....iirc it gained 5bhp when they tested it....and that was only BPs stuff not 99 tesco stuff!
if u dont mind sayin bighp how much was the remap about....need 2 get mine dun :twisted:
it's £400, but £350 to WC members :D
VIPERONE
08-02-2006, 10:25
i use BP ultimate.. Optimax degrades slowly reducing it to 95 Ron in time.
100.1p per litre for BP lol.
sounds like a bargin! *gos 2 check wallet*
:lol:
VIPERONE
08-02-2006, 10:27
Texaco fuel is to be avoided.. my old garage got closed for a week as the Petrol was watery about 70 Ron.lol
Texaco fuel is to be avoided.. my old garage got closed for a week as the Petrol was watery about 70 Ron.lol
:shock:
think iv only ever been there twice....usually BP or sainsburys 4 me
mine was mapped on optimax........nowt else passes the filler cap if i can help it.
VIPERONE
08-02-2006, 15:05
mine was mapped on sunoco race fuel........nowt else passes the filler cap if i can help it.
:shock:
Mine made less than that, I got 148 at Wheels, and I have Cams...lol
We shall see on Sat :twisted:
Mine was mapped on Optimax
:twisted:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.