PDA

View Full Version : 0-60 less than 6 seconds



david932
06-02-2006, 04:47
any 1 know where theres a site where u can upload videos of mobiles, i got my was standard williams, bar a scorpion exhaust doin quite a quick 0-60 time. idea for any1 who hasn't tried it yet. get ur mate to video on their mobile ur 0-60 run. on most phones the video has a timer, not accurate but you can get a good estimation. cheaper and more readily available than drag strips!

2 live
06-02-2006, 09:22
id be very surprised if u got a std willy that low tbh mate...... they all need a change to 3rd to hit 60......unless they chipped...which adds time, hence the close 0-60s of the valver n willy, valver will hit 60 in 2nd.



think mine was v high 5s low 6s...when it was cammed, mapped etc. just to give u something to compare to..was 6.7 with cams n no chip.7.01 std.

Chris n`nic
06-02-2006, 09:49
Yeah as Jon says...v low 7`s probably about right

Chris

Lunner
06-02-2006, 13:19
On teh speedo true 60mph is arounf 66/67mph on the clock

Clio_GTT
06-02-2006, 14:04
think of it this way, nick read only got a 5.5 with his big spec turbo setup, no chance of touching it with a willy. 5.5 is the paper figure for a nissan pulsar GTiR

Chris n`nic
06-02-2006, 14:12
Not sure about that m8...There will be a nice balance of power and grip etc....you could have 400 bhp but it wouldn`t mean you`d get 3 second 0-60 in a FWD. I managed a 5.8 in my Cup which wasn`t 100% and only had rear seats out so I would say a super stripped cam`d willie must be able to get close..of course the driver has lots to do with it :wink:

Chris

Clio_GTT
06-02-2006, 14:24
maybe as you say a stripped to the hilt willy with a lot of engine mods and a good driver "may" come close.

FlamingMonkey
06-02-2006, 14:26
Mine did a 6.8 to 0-60 with just an exhaust

I reckon it will be lower now, will be good to test it again at York this year

J o n
06-02-2006, 14:42
On teh speedo true 60mph is arounf 66/67mph on the clock

Willy's more accurate than that... no wonder you think your car will beat valvers :wink: :lol:

harry67
06-02-2006, 14:42
mines done 6.4 to 60 before and it was completly standard.

Jamie.
06-02-2006, 15:11
On teh speedo true 60mph is arounf 66/67mph on the clock

Willy's more accurate than that... no wonder you think your car will beat valvers :wink: :lol:

pmsl

david932
06-02-2006, 15:34
please some1 help me find a site to post my video, i wud really love 2 show u all the vid. ur right about not hittin 60 till 3rd. i hit it just as i change up. whens the next stip run and where? my cars in the shop at the moment havin some mods done so assumin the do em correctly it shud be even quicker

Chris n`nic
06-02-2006, 16:21
mines done 6.4 to 60 before and it was completly standard.

Whats that in m8?

Chris

McPikie
06-02-2006, 16:53
mines done 6.4 to 60 before and it was completly standard.

Whats that in m8?

Chris

His dreams :lol:

David, what mods are you having done??

Swervin_Mervin
06-02-2006, 16:56
On teh speedo true 60mph is arounf 66/67mph on the clock

Willy's more accurate than that... no wonder you think your car will beat valvers :wink: :lol:

Nah, he's right. I've tested them and they're near as dammit 10% out most times.

Coops
06-02-2006, 17:16
and thats me going at 20mph indicated speedo speed through every camera etc from now on!! :shock:

Swervin_Mervin
06-02-2006, 17:18
They don't under-read, as that's illegal.

Every car I've been in over-reads by roughly 10%.

Coops
06-02-2006, 17:31
once again i type summit before thinkin it through properly, doh!! :oops:

right next speed camera am doin 33mph!!! :lol:

Swervin_Mervin
06-02-2006, 17:36
I bet you'd be safe doing an indicated 80-85 on uk m-ways, let's just say that. :P

harry67
06-02-2006, 18:15
Chris n`nic, that was in a standard williams.

Mcpikie, really have no reason to lie about it do i!! i actually have a picture of the time on my phone

This was timed by a gtech, which are supposed to be very accurate so im told? used it in my bro's 182 and he got 6.7

Martin
06-02-2006, 18:22
ahhh g-tec..now it figures ....get to 1/4 mile strip for a true performance reading

ash clio gtt
06-02-2006, 20:11
http://www.putfile.com/

VIPERONE
06-02-2006, 21:38
g techs r v accurate

Jus
06-02-2006, 21:49
g techs r v accurate

Ive got one of these if anyone wants it :) ive honestly got no need for it.

brand new in the box, I bought it about a year ago and just never got round to doing anything with it. if you want it pm me an address and ill post it you.

2 live
06-02-2006, 21:56
think of it this way, nick read only got a 5.5 with his big spec turbo setup, no chance of touching it with a willy. 5.5 is the paper figure for a nissan pulsar GTiR


not true./all the races iv had against nick reads turbo beastie....iv beasted it past 1/8 mile...winning most of the races iv had with it.