View Full Version : Mark's Rally Clio
Swervin_Mervin
18-03-2005, 16:31
http://www.evoposters.net/carpics/album238/Cliointerior2.sized.jpg
http://www.evoposters.net/carpics/album238/Oulton1.sized.jpg
http://www.evoposters.net/carpics/album238/Oulton2.sized.jpg
http://www.evoposters.net/carpics/album238/Oulton3.sized.jpg
http://www.evoposters.net/carpics/album238/Oulton4.sized.jpg
http://www.evoposters.net/carpics/album238/stickered_clio3.sized.jpg
http://www.evoposters.net/carpics/album238/stickered_clio5.sized.jpg
VIPERONE
18-03-2005, 16:33
very nice.. loving that steerin wheel.. precisely the one i want... monza or something i think... looking forward to spec...
KingStromba
18-03-2005, 16:34
Best get that on the stand at the FCS young man :D
Quality
Mark_Ritchspeed
18-03-2005, 16:49
Heres the spec :
1993 16v shell . Full Williams mechanicals , Jb3 Kangoo gearbox with 4.22 FD , B&M quick-shift , Fia app. Sparco Evo 2 seats , Fia app. Safety Devices 17 point cage , Fia app. Safety Devices harnesses , Fia app. plumbed in & hand-held extinguishers , WRC roof vent , perspex windows (with sliders) , Magnex exhaust with de-cat , Hillpower chip @7.5k rpm limit , Willwood brakes , adjustable rear bias , Full underside gaurding , Internal fuel & brake lines , Terratrip Intercom system , Terratrip 303 rally computer , OMP Rally steering wheel 220lbs front springs , Bilstein dampers , fully rebushed suspension , new Williams front subframe . 3 sets of wheels/tyres .
Power wise its about 165bhp and the weight is @ 900kgs
All work carried out in-house . :D
Mark_Ritchspeed
18-03-2005, 16:52
Best get that on the stand at the FCS young man :D
Quality
Does that mean I will have to wash and polish it , or can I take it out into the forests and get it plastered in mud ? :roll:
Swervin_Mervin
18-03-2005, 16:52
I suggest plastered in mud. Maybe some divots of grass as well?
VIPERONE
18-03-2005, 16:53
whats the kangoo jc3 like ratiowise???
KingStromba
18-03-2005, 17:03
Get that slag, mudded up and in the centre of the stand. AV IT
how u get round the sunroff?? welded plate or entire roof panel?
Mark_Ritchspeed
18-03-2005, 17:08
whats the kangoo jc3 like ratiowise???
Cant remember the exact ratios now (must be written down somewhere) , but from when I was researching it , the box was a fair bit lower geared than the Willy box throughout and has the 4.22 fd as opposed to 4.08 for the Willy.
I am yet to run it as its still being put in the car , but I'm guessing that 1st will be too short to be of much use , but all the other 4 gears seem quite close including 5th . Hopefully top speed will be down to @ 125mph as opposed to 142mph with the Willy box.
Mark_Ritchspeed
18-03-2005, 17:11
how u get round the sunroff?? welded plate or entire roof panel?
The sunroof is actually riveted and bonded . The bonding material (cant remember the name) is the stuff that Lotus use for their chassis and is pretty expensive but extremely strong. Supposedly just as strong as a welded joint.
Thought about welding it , but the metal on the Clios roof is so flimsy it would have got severely distorted .
Then just cut a hole in the new section to fit the vent.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.