View Full Version : disks and pad prices?
wheres the best place 2 buy standard disks and sum decent pads?....
MOT is soooon and im 99% sure im gona need new disks and pads all round :(
www.andyspares.com
I went for standard disks and Pagid pads again.
i find halfrauds quite hard to beat tbh...wot was it jon..345 for a pair o discs n pads or summat....zollo said the pads werent too bad either
erm, think it were £20 a disk and £4 for the pads! :lol:
tbh, no, can't be beaten on price
Yep, those £4 pads did me proud at Cadwell, particularly considering what a state the rest of the brakes were in!
Aren't the rears quite a bit more expensive because they're the bearing carrier too? So you'll more than likely need new bearings as they'll be too seized to put back in? or something like that! :oops:
yeah, they come pre pressed on the rears I think... not cheap... might go Halfrauds for them and use 2 live's 60% discount :lol:
The ones I bought from Euro Car Parts didn't come with bearings pre-pressed. I had to get them seperately. £50 for the discs, and £55 for the bearing kit. Was I stiffed by the ECP boys?!?
erm, think you got the long dry one there mate... i've only ever bought them pre pressed and for about £45-50... :shock:
Thought as much at the time. But without the knowledge that they should definately come with bearings, I couldn't really agrue! Oh well :roll:
well i didn't know either, I only found out when I asked why the rear disks cost twice as much as the fronts... lol
live and learn I guess, at least you know now mate
halfords stuf any gd then lads? dont wana be changin everythin agen few months time from now!
BigBoreBri
27-01-2006, 19:06
Rear Disks + Bearings (7700805006) are £45.50 Each +VAT, Rear Pads (7701204626) are £36.00 +VAT for a full set!
Ask for trade discount and you will prob get 10% knocked off like... [-o<
rears come with and without bearings. think its the later ph 2s with abs etc that had the bearings in the discs
rears come with and without bearings. think its the later ph 2s with abs etc that had the bearings in the discs
any1 with any more info on this?.....mines a p2 but hasnt got abs! so i might just need disks without bearings???
better off gettin the discs with the bearings in already mate ybh.......no matter if uv got abs or not.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.