gearbox fit

[black williams]

do i need to take the engine out to fit need box and is it a easy job to do
would i need help

[MatBrown]

Easier with the engine out.



Mat.

[black williams]

is it a hard job tho in all as never tryed to do a big job before

[James Clio 16v]

Not overly difficult. Just make a note of where everything goes, label up wiring etc and even take pictures and you will be fine.

I'd never done anything like this before and I did a Williams coversion on my 16v a couple of months ago and everything was fine.

Good luck

James

[black williams]

thanks for advice mate will prob give it a go if i can get a box

[case]

i find it easier to remove the subframe, take the weight of the engine on a crane and then just drop it slightly. means you don't have to disconnect everything. But thats just my personnel preferance. Good luck :)