View Full Version : Prima superchip
VIPERONE
13-01-2006, 15:42
7.5k rev limit
mapped for Williams 3
(exhaust decat)
as used by winston to run a 14.3 on the strip
http://i4.photobucket.com/albums/y109/gunnergibson/chips.jpg
£50
just requires a chip carrier which are 75pence from maplin & other stores
gunner...do you do any for a 1.8 16v?
VIPERONE
13-01-2006, 17:02
not yet :-)
ok mate, let me know when u have some in \:D/
VIPERONE
13-01-2006, 17:10
the one that i did have didnt work correctly. :-|
ahh..could you recommend a place to get a decent one from? or are they all cack?
VIPERONE
13-01-2006, 17:30
only companies i would trust are hillpower & chipwizards .
prima = superchip
oh and Gunnerchip.
If these are similar to HP stage 1 re-map's, then it's a good price
williams-3
13-01-2006, 18:44
hmmm ? :roll:
VIPERONE
14-01-2006, 15:36
NOW ON EBAY!!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8030316067&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1
right i changed my sisters interior for my old valver one and now i got a mk1 phase 2 clio 1.4 RT interior in grey and blue for sale!!
if anyone is interested drop me a pm and i can get some pics!!
Coops
VIPERONE
14-01-2006, 18:47
WTF!
?? coops? whats up with that mate u nicked his thread, start ur own fella :D
:o the cheek!
i want!! no one else bid i want it! :D is it going to be a pain for me to get fited?
The picture shows a lot of chips, you have a few for sale then gunner? I want one too!
Clio_GTT
15-01-2006, 11:35
can these be used on the 16v ECU for hybrids ?
VIPERONE
15-01-2006, 14:15
i thought no one was interested so i put it on ebay lol
to fit the chip all you need to do is take your ecu ot nd then take it to a television repair man.. you need to buy a chip carrier from maplins.. 28 pin eprom carrier. get him to solder it in.. just take note where the notch at the end of the eprom sits.. and put the chip in the carrier.. easy it will cost around 75p for a carrier and £5-10 for the electronics guy to solder it in.
williams-3
15-01-2006, 14:27
whats the performance gains with these mate ? any1 on here running them ?
VIPERONE
15-01-2006, 14:30
yes i ran with it lol.
dont they kill top end tho mate?? urs is/was shit 90+
VIPERONE
15-01-2006, 18:42
no only on mine.
On winstons it was fine..
he has ran some quick times with it,.. and a fast terminal.
think it was probably to to the smaller valves in my cylinder head.
its not shite anymore...lol running your map. ;-)
hmmm......thort winstons was always std but stripped. :shock:
hmmm......thort winstons was always std but stripped. :shock:
It was only used the chip on the last york day we did....
14.4@97mph ....With out chip
14.3@99mph ....With the chip
Nice to have a few more revs to play with :wink:
so hardly any quicker then??
williams-3
16-01-2006, 10:09
14.4@97mph ....With out chip
14.3@99mph ....With the chip
Nice to have a few more revs to play with :wink:
you only got -1 tenth of a second 1/4mile with the chip ? Prob not even worth it :?
14.4@97mph ....With out chip
14.3@99mph ....With the chip
Nice to have a few more revs to play with :wink:
you only got -1 tenth of a second 1/4mile with the chip ? Prob not even worth it :?
An extra 2mph is quite a bit on a 1/4mile though. So perhaps the run with the chip was not quite such a good launch...may be...dunno...
yeah theres too many variables .especially on diff days.
but was it actually any quicker?? i mean on the road. its debatable that the chip made any improvements on std down the strip, but that can happen, yet be loads quicker a to b.
Gunner, are these copies of the Prima chip you're selling as you've a few in that picture?
Also - these contain a complete 2ltr map don't they so i should be able to whack it into a 1.8 ECU and it'll work?
Ta.
VIPERONE
17-01-2006, 21:44
No...there blank... i dunno about 16v yet.. i have a test ecu at my house to try my other ones one...;-) i'll let you know!
Doh - wasn't clear enough about this; i mean if i just plug it into a 1.8 ECU thats running a 2ltr it'll work as a 2ltr ECU..i.e mapped for 2ltr
i would presume so!
mine is running a 16v ecu with a remapped hillpower chip!
Its a 2.0L btw! :wink:
VIPERONE
18-01-2006, 00:24
**SOLD**
BUYER wishes to remain ANONYMOUS
williams-3
18-01-2006, 18:19
what were these chips mapped on ? de-cat- exhaust etc ?
**SOLD**
BUYER wishes to remain ANONYMOUS
Probably Zollo with more mods :roll: :wink:
bummer! i was going to bid for that tonight too :cry:
**SOLD**
BUYER wishes to remain ANONYMOUS
Probably Zollo with more mods :roll: :wink:
If I've told you once :roll: .... modifying is for losers. :wink:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.