16v Camber Kits?

[tombambury]

Hi, I was basically just wondering if anyone knows where and if camber kits for the clio 1.8 16v are sold. My mate had em on his crx but I can only seem to find them for jap crap, none for my 16valver of even for any frecnh cars - 106 gti/ saxo vts. Maybe with the sort wheelbases of the frech cars there would be no gain, I really don't know, any ideas?

[Justin..]

try k-tec

http://www.k-tecracing.com/index.asp

[big hp]

Direct link......

http://www.k-tecracing.com/show_product.asp?id=799

[Coops]

how do them things actually fit?and work? and are they actually worth botherin with? my car is well low see n if helps handlin then 40 notes aint a bad investment!

[tricky]

They are thinner than normal bolts with cam profiles moulded on to them, as you turn the bolt the cam pushes the hub assembly away from the strut and once you have the corect camber setting you just hold the bolt steady and wind up the nut to hold in place.

They really should be installed by someone with camber guages though so that both sides are equal, etc etc.

[neilc]

Does the Clio really need them, even when they are slammed the camber doesnt seem far out.

[VIPERONE]

you can apply thinner bolys in to the ball joints and maually set the camber...or use a ruler for accuracy.. that way it costs 50pence.

[Lunner]

Or iehter bore out the holes in the wishbones/lower ball joints to move tyhe bottme of the hub out.

Or you can enlarge one of the holes on teh bottem suspenion strut and tilt the top of the hub, both these options are free.