Willwood 4 pots

[ScottCup]

I have a pair of wilwood 4 pot calipers they have had a full recon, new bleed nipples and new pistons and seals. I will get some pics up asap, they are in good condition and only have typical wear and tear (paint flaking) they are spaced for the 172 disc. I want £150 for them an £10 postage, Thats £160. You can get the discs, pads, hoses and brackets from mark richspeed.

[richy]

scott u had a word with bayliss i know he was after some for valver

[Plattsy]

i so want! how much are they to buy new tho?

[Mattie]

just under 400 i think???

how much would pads and 172 disks cost new?.....this is the set up im after - might have 2 dig sum money out - even though im skint :(

[northy]

172 disks are fairly cheap -

http://cgi.ebay.co.uk/Renault-Clio-Megane-Sport-172-182-Grooved-Brake-Discs_W0QQitemZ8022384615QQcategoryZ23013QQssPageN ameZWDVWQQrdZ1QQcmdZViewItem

Same for the pads

http://cgi.ebay.co.uk/New-OMP-Front-Brake-Pads-RENAULT-CLIO-172-2-0-16v-98_W0QQitemZ4596917182QQcategoryZ10410QQssPageName ZWD1VQQrdZ1QQcmdZViewItem

And you will need to buy a 2 x £23.00 universal mounting bracket for the caliper and have it modded to suit the williams /16V hub.

[northy]

oh and some new hoses that cost around £40 in total.

[J o n]

already spoken to Scott about these... cash waiting mate, can bring it over today if you want?

also need to ask a favour of you pal

[Mattie]

good job im skint otherwise id be pissed that i missed out on these :lol:

[northy]

I recon to fit these - you would need £120 (thats for the disks, pads, 2 hoses and universal mounting brackets)

The machining cost of the brackets will be around £30 tops if not cheaper.

But these calipers can be used with normal size williams disks, by removing one spacer from the centre of each caliper.

Then you do not get the extra weight penality of larger disks & spacers to upset the corner handling.

[Craig]

wont you need pads for the wilwoods not normal 172 pads tho. i think they are about £70!

so whats the deal with the full kit from mark? is this kit for a 172, hence needing the brackets machining, or will they need machining anyway even if you bought the full kit from mark?

[northy]

Sorry guys, craigs right. You will need WILWOOD PADS !

The machining is only needed if you by the universal caliper bracket. Ritchspeed kits come all ready premachined ready for fitment.

Scott just has wilwood calipers for sale....

Ritchspeeds kit are still avaliable. Check the links page for his details.

[ScottCup]

Thanks Northy, saved me a load of time, i am sorry guys but these calipers are sold to my good m8 bayliss! Thanks again

[Bayliss]

Thanks Northy, saved me a load of time, i am sorry guys but these calipers are sold to my good m8 bayliss! Thanks again

Excuse me i want to be known as anonimous bidder Mr X

No probs mate, may be in touch b4 xmas to come get them

[Plattsy]

:( bayliss sell them to me please :D

[Bayliss]

what u mena i didn't buy them Mr X did

[Plattsy]

lol well will u ask mr x to sell them me then :wink: