PDA

View Full Version : Alloy Fitment



measor
08-12-2005, 16:51
Iv found some wheels on ebay that I want but not sure what fitment size I have on the clio.

These are the wheel size

Stud Diameter: 100
Rim Width: 7J
Offset: 25
Number of Studs: 4

Would these wheels fit on my car?

Cheers.

Allan
08-12-2005, 17:13
clio's are pcd 100
J6.5
Et 36 to 38 iirc
and 4 stud
using valver ph2's

williams are either j7.5 or 7 cant remember which.

so only thing would be those have the wrong offset, so spacers needed

measor
08-12-2005, 17:16
nice one cheers mate, ill place a bid then!

Scott-16v!
08-12-2005, 17:21
aren't phase 2's 7j or 7.5j aswell?

Allan
08-12-2005, 18:51
nope they are not as wide, but it doesnt make much diff the tyres still fit all the same, just look a little thinner

BRUN
08-12-2005, 20:48
nope, with a 25 offset they will be further OUT, so a spacer would make it worse

you would be lucky for them not to rub

Allan
08-12-2005, 21:05
ah oopz thought it was the other way around :S

Grind the hub down ;)

measor
08-12-2005, 22:11
Just asked the bloke whos selling the wheels, he says -


"The centre bore is 60mm on a clio which is slightly larger than the the bore for a VW etc by about 2mm"

Does this mean theyre not going to fit?

Scott-16v!
08-12-2005, 22:13
yes at the moment, but you can have the centres bored out, i found the same problem when i was looking at some bbs split rims.

BRUN
09-12-2005, 00:36
these are not gonna fit mate because of the offset !

measor
09-12-2005, 13:16
BOLLOCKS!!!

Ill have to keep looking then,

Cheers for your help