GSF Parts

[Geezer]

Sorry all I know this has been posted a thousand times, but I could do help with some help on GSF parts... I'm ordering these for a Williams.

Cyclinder Head Gasket Set (Part - R11410)
Cyclinder Head Bolts (Part - R01164)
Cambelt & Tensioner Set (Part - R13085)

Are these all the right part numbers for the Williams versions? I have emailed GSF but have yet to receive a reply.

Thanks,

Craig

[MatBrown]

I would personally get the headgasket from Renault.



Mat.

[Fred]

craig my mate works for GSF in Birmingham, do you want me to get you a "mates rates" price???

[summeh]

GSF seem to think the hg for valver is same for williams! its not. So get the hg from elsewhere.

[Rich]

afaik it is same as williams mate, richy got me a HG from renault and i'm 99% sure its same part number. I have a HG from GSF which i have just done on mine and have had no problems whatsoever so a HG from GSF is fine :wink:

[BRUN]

77 01 467 230 16v Gasket Set
77 01 467 618 Willy Gasket Set

[Chris H]

thats gasket sets, the gasket is the same, the difference is in the cam seals and the exh man gasket dependign upon age, some used the spider head casting which has the lugs on the exh cam carrier for the big style gasket and from the inlet cam carrier has ther flat machined for the SFI sensor.

[summeh]

thanks for clearing that up chris. will get my hg from GSF in future then... altho last time they did say that the hg set for the 16v was also listed in their db for the williams

[Chris H]

even better go to eurocar parts and order a megane 2l 16V one, 25 quid for the gasket set, you can't use the inlet man gasket but it s agood set and a good 12 quid cheaper than the 16V/willy one.

[summeh]

i just need the hg, the meg one cheaper still? thickness is still the same between the meg/willy/valver yeh?

[Chris H]

aye same gasket, dunno about single gasket prices as I normally get headsets mate.

[BRUN]

yup those are the sets i quoted

cant seem to just get the HG from Renault according to Dialogys