Flan
05-12-2005, 10:29
Think it's a K
Renault Clio 1.8 16v
82,000 miles
Tax just run out
Stainless steel straight through (custom made good quality but unsure if its powerflow)
with decat + original cat
Red dot grooved front dics
New rear discs and pads
Spax uprated shocks and springs
Rear lowered to match
OMP strut brace
K&N induction kit
15" Team Dynamic Pro Race 1's in silver
at the moment
tyres are toyo proxis
The car has had a full respray at one point and is very nice. There is no rust on the arches and no sign of it starting to. The inside is std. The bad point are it needs an MOT. I can get this done but to be honest… Cant be arsed.. lol It needs a wheel bearing on the rear and the cat putting through and it will fly through.. I can do this if you twist my arm. The car has 2 scratches. One on the passenger door 12” long. Its down to the base cote so needs lacquer and polishing. There is a little one 3” on the tailgate I recon will polish out.the car drove 50miles on Friday fine (on a private road.. lol)
I brought this car to do 20V turbo project but decide im gonna do it to the Grey one instead.
Lookin for £800 without the wheels it will come with std (phase 2) but I will negotiate. Quick sale needed hence price. I think it’s a bargin…
Will part x with a practical car. Ie 306 turbo D or A4 tdi…ect.. no escorts or saxo’s… lol
For Pics
http://www.mycgiserver.com/~bassdirect/16v/
thanks for lookin…
Flan
:) :)
Renault Clio 1.8 16v
82,000 miles
Tax just run out
Stainless steel straight through (custom made good quality but unsure if its powerflow)
with decat + original cat
Red dot grooved front dics
New rear discs and pads
Spax uprated shocks and springs
Rear lowered to match
OMP strut brace
K&N induction kit
15" Team Dynamic Pro Race 1's in silver
at the moment
tyres are toyo proxis
The car has had a full respray at one point and is very nice. There is no rust on the arches and no sign of it starting to. The inside is std. The bad point are it needs an MOT. I can get this done but to be honest… Cant be arsed.. lol It needs a wheel bearing on the rear and the cat putting through and it will fly through.. I can do this if you twist my arm. The car has 2 scratches. One on the passenger door 12” long. Its down to the base cote so needs lacquer and polishing. There is a little one 3” on the tailgate I recon will polish out.the car drove 50miles on Friday fine (on a private road.. lol)
I brought this car to do 20V turbo project but decide im gonna do it to the Grey one instead.
Lookin for £800 without the wheels it will come with std (phase 2) but I will negotiate. Quick sale needed hence price. I think it’s a bargin…
Will part x with a practical car. Ie 306 turbo D or A4 tdi…ect.. no escorts or saxo’s… lol
For Pics
http://www.mycgiserver.com/~bassdirect/16v/
thanks for lookin…
Flan
:) :)