VIPERONE
28-11-2005, 22:48
Like my last project i took pictures etc..well my next project is underway...no pics as yet
Now:2.0l f7r cammed chipped stainless manifold ,stainless system decatted..
proposed: gunner 2.0l t
Garrett T 25, low boost application, circa 210bhp..naturally with potential for 230+ with btm end work.. none on this occasion....
full compression check before installation.
injectors and map sensor sorted.,oil feed and boost hoses sorted next investment: r5 chargecooler, once all parts are gathered will be attending ltr to remove engine fit and drop... est time for fitting 10 hours.....
pending funds willy box and uprated clutch...however.. will be fine on what im running at the mo..
pix to follow
Now:2.0l f7r cammed chipped stainless manifold ,stainless system decatted..
proposed: gunner 2.0l t
Garrett T 25, low boost application, circa 210bhp..naturally with potential for 230+ with btm end work.. none on this occasion....
full compression check before installation.
injectors and map sensor sorted.,oil feed and boost hoses sorted next investment: r5 chargecooler, once all parts are gathered will be attending ltr to remove engine fit and drop... est time for fitting 10 hours.....
pending funds willy box and uprated clutch...however.. will be fine on what im running at the mo..
pix to follow