View Full Version : Williams ecu?
Andyvalver
25-11-2005, 16:11
Do the phase 2 ecu's have the immobilser built in like valvers? When me and my mate swapped our phase 2 ecu's round they didnt work, but then i bought a phase 1 ecu off ebay and all was good :D
Im worried that if i buy a willy engine the ecu might be encoded if its froma willy 2 or 3. Do i have to be worried?
How much would it cost to get the immobilser removed from the ecu?
Cheers in advance :)
MatBrown
25-11-2005, 16:19
All Williams ECU's are the same.
Mat.
Andyvalver
25-11-2005, 16:29
But did some have immobilsers and some not like early valvers?
Will it work fine in my car then even though its phase 2?
Soz for the daft questions too :oops:
MatBrown
25-11-2005, 17:40
None have an immobliser.
Mat.
I just swapped ecu's with matt this week - mine's a 1, his is a 2...
No problems
Andyvalver
25-11-2005, 18:00
Oh right, cheers guys. 8)
VIPERONE
25-11-2005, 18:57
i could never run ph 1 valver ecus on mine.wouldnt work.
Andyvalver
25-11-2005, 19:51
Ah, at least someone as had my problem 8) Thats what im worried about if i get a willy lump from, say a 2 or 3. The ecu will be phase 2 and might not work in mine :shock: Can they be remapped to cut out the immobiliser?
Ah, at least someone as had my problem 8) Thats what im worried about if i get a willy lump from, say a 2 or 3. The ecu will be phase 2 and might not work in mine :shock: Can they be remapped to cut out the immobiliser?
No Williams ECU's have built in immobilisers.
VIPERONE
25-11-2005, 22:56
the willy ecus are not the same as the valvers.. they are their own unit....
ive only had problems with the 1.8 ecus..
willy 1 and 2 ecus are different to the willy 3 one i think since the willy 3 has abs enabled on it and the williams 1+2 doesnt! i have a willy 2 ecu on my hybrid and the abs doesnt work!
willy 1 and 2 ecus are different to the willy 3 one i think since the willy 3 has abs enabled on it and the williams 1+2 doesnt! i have a willy 2 ecu on my hybrid and the abs doesnt work!
That's because your ABS is bust then.. cus' the ECU's are all the same.
ABS is a seperate unit.
Andyvalver
26-11-2005, 13:50
Glad we cleared that up :D Cheers guys, i have no worries now :P
so the abs has nothing to do with the ECU? why when i asked people if the williams ecu supported abs they said no youd have to get a williams 3 ecu or have the standard valver ecu mapped as a 2litre to keep the abs.
that came from GDI!
VIPERONE
26-11-2005, 19:54
they dont know everything down there..lol..but know enough
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.