View Full Version : Willwood Clearance
Do Willwoods fit behind Valver wheels? Turbines and Phase 2s?
Ta :)
Put some Phase 2's on the Nana last week @ Anglesey and it was fine....not sure on Turbines though.
if you go for the standard size then yes they will fit.
My special Ritchspeed approved 'northy sized' ones wont.
Nice one. Normal size, after all it's not the size that counts but what you do with them :P
I have got Hi-Spec 4 pots and 300mm discs behind my turbines, theres about 5mm clearance lol
How the hell you get 300mm discs in there my old car with 285mm discs was tiggght wheel weights had to come off lol
http://img177.imageshack.us/img177/1459/285mmcloser1bm.jpg
What calipers are they Martin? Standards?
The 300mm discs and Hi-Spec calipers need 360mm clearance inside the rim, and we have got 364mm ish clearance.
Im going to be fitting willy wheels in the next day or so......so hopefully they will fit inside them too 8)
What calipers are they Martin? Standards?
The 300mm discs and Hi-Spec calipers need 360mm clearance inside the rim, and we have got 364mm ish clearance.
Im going to be fitting willy wheels in the next day or so......so hopefully they will fit inside them too 8)
I've just measure the Williams wheels there just over 360mm cleaance about 366 from my guess.
Mint cheers edde :)
About as tight as the turbines then lol, at least you will be able to see them under the Willy rims, especially once refurbed white
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.