PDA

View Full Version : Hillpower Meet?



dannyt
04-03-2005, 13:15
I've spoke to him many a time on the phone but would like to go down and check out Hillpower, is anyone else up for a bit of a trip over there?

Martin and Winston - you could get both of yours chipped like you wanted to, i could buy myself a williams engine!!!!I wish!!! and maybe even a rolling road session and bbq?

What does everyone think?

Danny

KingStromba
04-03-2005, 13:20
Im in.

Winston
04-03-2005, 13:38
Sooooooon!!!!!! :twisted:

BRUN
04-03-2005, 15:35
im off work from Monday 14th March - Sunday 20th March

so ill come, i was gonna go there anywayz to have the injectors cleaned

im not used to this car yet though so dont be blastin off without me lol

Winston
04-03-2005, 15:40
14th or 20th sounds good to me :D

have to set a date so we can all get booked in

KingStromba
04-03-2005, 16:01
Too soon for me.

BRUN
04-03-2005, 16:48
im off in between those dates, 14th -> 20th

Martin
04-03-2005, 21:25
I'm going down on the 15th Tuesday, to get limiter raised.....

MatBrown
04-03-2005, 21:34
Might pop over and see you then, not far away.



Mat.

Winston
04-03-2005, 22:13
Sweet martin....Will ring Nick tomorrow to try and get mine booked in for a chip on the 15th

What rev limit you going for?

KingStromba
04-03-2005, 22:26
The new F1 engines rev to nearly 20,000 :shock:

Martin
04-03-2005, 22:30
Think I'm gonna go for 7000 rpm limit Winston, Nick says he can set it to whatever you want but he usually goes for 6800 rpm for unbalanced williams engines.... Would be good to drive down together if you can get in on the same day! Might turn into a mini meet if Mat pops round! 8)

KingStromba
04-03-2005, 22:31
Doe you car pull all the way to the limit Martin?

Martin
04-03-2005, 22:34
My williams made peak power at 7200 rpm...and the banana is just getting going at 6400 rpm! So the answer to your question is ...yes!

Winston
05-03-2005, 02:23
well mine revs to about 6800 on the valver clocks.....was hoping to get it to 7000...will speak to nick about it tomorrow :D.

Chip and rolling road......see what BHP its running

dannyt
05-03-2005, 21:14
i might take this day off work too, is anyone else up for it?

Winston
06-03-2005, 01:48
Can't make it on the 15th :cry:

Martin
06-03-2005, 20:37
Boo! Ah well will have to wait to see the euro hybrid!

dannyt
06-03-2005, 21:36
right martin, im gonna see tommorow if i can book mon and tues off, and half day fri so i can come down with you on tues and we can maybe have a comparison tues mornin or afternoon, however i normally work tues night at my other job so,

what time du think we will be back, should i change my shift, to wed or thurs night?

could i come along in your motor mate, instead of using 2 lots of fuel?

also is anyone else coming?

Danny

Martin
06-03-2005, 21:55
Hmm, well I would'nt want to put an exact number on the time we'll get back...due there at 10:30 2 hours for sorting the chip(?) could be back for 4pm ?? I'd book it off to be on the safe side...you can hop in my car if you want to come down mate.

Winston
06-03-2005, 22:33
Gutted I can't see the banana.........We need a meet before york, I could come and meet you and maybe danny most nights...or in the day wednesdays, fridays and weekends.....also where to meet lol

Martin
07-03-2005, 00:28
Yeah deffo needs sorting..I can do most days after 4pm, but that Danny will probably be working one of his three jobs! :wink: We'll have to sort something out...

Winston
07-03-2005, 01:13
Good...Good....It rests in you hands dannyboy

dannyt
07-03-2005, 08:59
right ill let you know about next tues martin!!!

lads im free, monday night after 5:30?

tues - i work

wed - free after 5:30 but could get off earlier, same with Monday?

thursday - normally can meet about 6?

fri - i work till 9.

sat & sun - im free,

so let us know, if you wanna meet up in the day and go for a drive round some of martins roads then think a weekend would be best for me, but martin works a lot at weekend!!!!

so if not mon, wed and thurs after work is fine?

Danny

MatBrown
07-03-2005, 11:02
Hmm, well I would'nt want to put an exact number on the time we'll get back...due there at 10:30 2 hours for sorting the chip(?) could be back for 4pm ?? I'd book it off to be on the safe side...you can hop in my car if you want to come down mate.

I don't finish work till 14:15 so might not make it over in time.



Mat.

dannyt
07-03-2005, 12:10
well i've booked it off one work now got to ring up and get it off another!!lol

matt - if im not working then we'll wait for you to come over, then have a bit more of a meet, i might drive!

Matt - do you do resprays?

danny

Martin
07-03-2005, 13:49
right ill let you know about next tues martin!!!

lads im free, monday night after 5:30?

tues - i work

wed - free after 5:30 but could get off earlier, same with Monday?

thursday - normally can meet about 6?

fri - i work till 9.

sat & sun - im free,

so let us know, if you wanna meet up in the day and go for a drive round some of martins roads then think a weekend would be best for me, but martin works a lot at weekend!!!!

so if not mon, wed and thurs after work is fine?

Danny

Right then I can do wed or thursday night or if you want a a bit more daylight... Could get Sunday afternoon off?

MatBrown
07-03-2005, 13:49
Nah, only at work, don't have the facilities myself.



Mat.

Martin
07-03-2005, 13:51
Cost me about 30 odd quid in juice last time I went to Hillpower Danny..not too bad. Let us know whats happening....

dannyt
07-03-2005, 14:35
will do martin ill prob just come down with you if thats ok as I don't think im gonna bother getting anything done to the motor!

Ill prob be over at the chics uni so Tues mornin could drive over to yours, leave the motor there and then we can cruise down in yours, what time du need to set off martin?

Danny

No worries matt just though i'd ask!

Winston
07-03-2005, 15:27
Right then I can do wed or thursday night or if you want a a bit more daylight... Could get Sunday afternoon off?

Sweet....Thursday night? up your way? PM me with the details if you like

dannyt
07-03-2005, 16:10
i might not be able to do thurs, why don't you come over tues night after the hillpower chip on martins?

Winston
07-03-2005, 16:16
Sounds good to me :D. but how about Sunday......get some good pics in the day light? Give me a chance against the banana before its limits increased lol

dannyt
07-03-2005, 17:12
im fine for Sunday but martin tends to work a lot at weekend think he gets extra money for it!!!! will have to see if he can make it!!!

If not then Tuesday night?

Martin
07-03-2005, 20:45
Yeah, double time! I should be able to get sunday afternoon off though..if you two are deffo up for it? Should set off on Tuesday at 8 am Danny maybe quarter to..?

Winston
07-03-2005, 21:09
Well im up for a sunday afternoon meet....Thats if you don't mind not working.

Im easy.....we just need to meet soooooooon!!!!! need to see the banana lol

FlamingMonkey
07-03-2005, 22:15
I'll prolly bob along if you don;t mind fellas if its a sunday

Winston
07-03-2005, 23:29
Sweet Monkey.....Try and get some more down if we can?

Martin
07-03-2005, 23:46
Cool, would be good to get a few peeps together.

Winston
07-03-2005, 23:58
Maybe start another thread? Where we going to meet then? Your stomping ground martin :twisted:

BRUN
08-03-2005, 01:42
so are you two still going to hill power on the 15th ???

as im gonna book mine in with Nick for a diagnostic to try and solve my starting problem out

was gonna do it for the same day so i could follow you down, i know you will have to leave before im done cos danny has to get back for work, but it means i wont get lost !

if you are going could you text me tomorrow so i can book in with Nick
07764 741467

dannyt
08-03-2005, 09:10
Yer sounds good to both, me, martin, Brun and possibly matt for the meet at hillpower? Ill be around at yours for about 7:45-8am then mart?

Then Sunday afternoon, what time though as i normally take the chic back to uni so need to tell her, if it's going to be near tea time ish?

Im free from anytime Sunday so whenever people want to come over?

So far,

Me,
martin,
flaming,
winston,
anyone else?

Danny

GazTwo
08-03-2005, 13:06
Might be up for this depending when and where.

Martin
08-03-2005, 18:15
Yer sounds good to both, me, martin, Brun and possibly matt for the meet at hillpower? Ill be around at yours for about 7:45-8am then mart?

Then Sunday afternoon, what time though as i normally take the chic back to uni so need to tell her, if it's going to be near tea time ish?

Im free from anytime Sunday so whenever people want to come over?

So far,

Me,
martin,
flaming,
winston,
anyone else?

Danny
Sounds good danny, tag along brun more the merrier!
I was thinking 12-1 o'clock Sunday...have'nt got it off work yet but should be able to sort it..

BRUN
08-03-2005, 19:41
where would i meet you then

i didnt ring Nick today as the car has been starting first time lately, need to give it a bit of gas but its a lot better than it was

im gonna make my own grounding kit and redo the OE earths see if it solves it

Martin
08-03-2005, 20:11
Just meet at the nearest services to you on the m6 ....what do you reckon? We're coming down from jct 32ish..

BRUN
08-03-2005, 21:02
what junction is the one a bit down from the 62 at haydock ?

dannyt
09-03-2005, 09:10
Im looking forward to my days off!

I might not be able to get the afernoon off work martin, so how long does it take to get back from Nick's?

Also do you think we will be back at 5 or not?

Danny

Martin
09-03-2005, 17:13
Well I dunno Danny, I have'nt got a crystal ball! :wink: I would guess it would be difficult to get back to yours for 5 though...

dannyt
09-03-2005, 17:39
i might drive and then leave early mystic meg!!!! :wink:

BRUN
10-03-2005, 01:41
seein as the car is starting better now i might book in for a RR run instead of a diagnostic, and a chip remap, this car has already got a HP chip but if he sticks it on the rollers he might be able to map it better than it already is

Martin
10-03-2005, 10:59
Yeah, I would expect better results from a chip now Nick has his r/road to use...especiallly with yours having cams Brun....So how does it drive by the way...do you notice the willy track and cams? How does it compare to your old Rt GTT?

BRUN
10-03-2005, 19:52
well ive no idea what a normal valver drives like so........

off the mark the GTT was a lot faster, it was like a rocket, once your goin though the valver is faster top end, by quite a margin, though in all fairness the GTT engine isnt any good for top end which i knew when i put it in my other car (R.I.P Clio GTT)

its a nicer drive than the last car, possibly because of the 195/50 tyres and willy suspension ?

BRUN
14-03-2005, 14:43
jus thought it best to let you know

im probably not coming tomorrow, ive been really ill lately, and i havent booked in for anything there

you can catch me on MSN - mbrunskill69@hotmail.com

MatBrown
14-03-2005, 17:23
Tell me about it!
Can't keep off the Toilet at present.
:shock:


Mat.

BRUN
14-03-2005, 18:33
yea, i had the sickness, now ive got the shits

BRUN
15-03-2005, 00:06
well i feel better now so ill come along for somethin to do

gimme a meetin time and ill see you there

BRUN
15-03-2005, 01:13
ive text danny but guess he's asleep, dont have a number for Martin

ill try and get up at about 7 tomorrow and get ready

hopefully someone will text me when your settin off etc

07764 741467