Whats the deal with the Megan bottom end

[neilc]

What sort of increase will it give etc

Is it a stright swap or do you have to mix and match parts.

Got to do the head on the 16v so might give this a go at the same time :) .

cheers for any info.

[Andyvalver]

A good increase :P It will be just like a willy lump exept the 1.8 head has different porting ever so slightly. You will gain plenty of torque :evil:

[stan]

easiest/most common is to fit your 1.8 head to the meg block. straight forward enough if u can use a spanner

[neilc]

So you just need the bottom end and all the gear box and drive shafts just bolt stright in then ??

[Lunner]

Yup, basically, and the best part is it looks the same, so insurance is cheaper ;)

[VIPERONE]

im running megane bottom end with 1.8 rebuilt head...with cams, chip , stainless manifold and decat, and filter..lol and widetrack...

you will enjoy the change.. make sure you laser align your tracking lol.

[neilc]

so on average what do the bottom ends go these days

[Andyvalver]

What ecu do you need if you put the meggy bottom in with the 1.8 head? Im guessing it will run a little different :?

[neilc]

Bttt