PDA

View Full Version : Williams 1 (312) lots of Months welding.. ok over a year..



Andy Dossor
02-12-2017, 14:56
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8675&stc=1 it started bad
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8676&stc=1Then got worse
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8677&stc=1then I felt sick...
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8678&stc=1then I cried
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8679&stc=1cried a few times....
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8680&stc=1 Now I have a new floor and some where to bolt the fuel tanks
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8681&stc=1Rolling shell ready for rear wheel arches:grin:

W1LL14M5
02-12-2017, 14:59
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8675&stc=1 it started bad
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8676&stc=1Then got worse
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8677&stc=1then I felt sick...
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8678&stc=1then I cried
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8679&stc=1cried a few times....
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8680&stc=1 Now I have a new floor and some where to bolt the fuel tanks
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8681&stc=1Rolling shell ready for rear wheel arches:grin:And i thot my w2 was bad....a lot of hours mate


Sent from my Pixel 2 XL using Tapatalk

white16valver
14-12-2017, 14:37
Was it parked at the bottom of the sea?? lol

zippy!
14-12-2017, 22:16
Superb work.

manxseven
14-12-2017, 23:21
Good work,
I've got 313!

TreyHenderson
12-02-2018, 08:11
Great job, man! :)

GavFitz
12-02-2018, 10:36
Fair play!

Sent from my SM-G925F using Tapatalk

ianbirch
12-02-2018, 18:18
Yep...thats what they are like when the advert says "solid bodywork only a small amount of bubbling on the arches"

Regards Ian

PhilW
15-02-2018, 21:39
Yep...thats what they are like when the advert says "solid bodywork only a small amount of bubbling on the arches"

Regards Ian

As ever Ian, you have it bang on 👍

PhilW
15-02-2018, 21:41
Andy, I can sympathise with you, its a horrible feeling when you realise your project is far worse thn you could ever have imagined.
Looks like you are making some good progress, best of luck with it 👍

MctheBstard
02-08-2020, 13:49
Hello Any

Another Williams owner hear and I see you have had some first hand exposure to the sad fact that these require alot of attention and I have a concern that you may be able to answer.

I very recently had a health check on my car at Renault and they have identified mine needs repair work done to the area of the underbody where the back axel bolts onto it.

Have you had to do anything similar to that

Mike

ianbirch
03-08-2020, 08:42
Hi Mike...send Andy a Private Message as this thread has been quiet for a couple of years.

Phil Walker on here is a good guy to talk to but you're more likely to get him on the Facebook page here...

https://www.facebook.com/groups/19431546816/?fref=nf

Regards Ian