PDA

View Full Version : Bottom end / head with cams



walters300
28-08-2016, 17:24
Hi Guys,
Selling a bottom end and head with cams I got with a Williams Harlow cup car, original engine must have died as its got a Valver bottom and top end by the looks of it, I am going to rebuild that car as a maxi with either a 182 or 197 engine when the time comes. Have a look and see what you think and if you can confirm I am correct on the spec of each item that would be great as I'm not that clued up on the engine side of things.
thanks
Barry
http://www.ebay.co.uk/itm/131922018081%20
http://www.ebay.co.uk/itm/131922032164%20

16v_paddy
28-08-2016, 20:12
Linky no worky, says items have been removed :???:

walters300
29-08-2016, 11:23
Ah ha!!! Now your the man to sort this out... I will put the item numbers in below so you can copy and paste... Thanks Paddy....
131922018081

131922032164

walters300
04-09-2016, 13:56
I have found the markings and they are Kent cams RN2003 which is the second size up in the range before the race items, lark speed charge over £500 for the cams alone and I am selling the head/ cams and pulleys starting at £600. Bargain for someone..
item number-131928790102

walters300
04-09-2016, 14:14
Also have 3 7j steelies listed if anyone is looking to make up a set.