Remaining 16v / Williams parts - cheap

[bison3]

It's been a long time since I've been here but I'm having a little clear out of the storage and still have plenty of parts left over.

These are the main remaining parts I have for sale, they are all cheap and I wish some parts were half this price when I needed them. I've got pics of some of the bits so can send if needed. Located in Northampton but will post pretty much anything out.


Mechanical and electrics:

Headgasket set brand new for 16v/Williams - Motaquip, a good pattern part with all bits and gaskets included - £28 delivered (cost me a hell of a lot more)


PH2 16v ECU - £10


16v starter motor (x2), both fully working - £10 each


Brake calipers - £10 each


Steering column - good condition, no play - perfect if you have play in your steering wheel - £10


Stainless steel midsection - £15


Standard mid section - £10


Downpipe with lambda, all fully working - £20


Radiator fan (x2) fully working - £8 each


Radiators (x3) fully working - £5 each


Heater matrix - £5


Cylinder head (16v) - £5


16v Exhaust manifold -£5


Inlet manifold with throttle body - £10


PS reservoir - £3


Power steering pipes, both types - £10 each


PS rack - £10


Aux fuel tank with pump etc - £5


Coil pack - £5


Dogbone mounts - £5 each


Exterior:

449 passenger door, some scratches without door card - free if you collect


449 16v passenger side wing with ph1 16v badges and repeaters, good condition - £10


449 16v drivers side wing with ph1 16v badges and repeaters, good condition - £10


Black 16v passenger side wing, good condition - £10


449 colour coded scuttle panel - £5


Primed and painted black scuttle panel - £5


Headlights - £4 each


Rear lights - £4 each


Interior:

16v clocks - £5


Stereo cover - £4


PH1 16v dash top (the nice one), good condition - £10


Clear side repeaters - £5


PH1 wing trim - £5


Silver gear knob with all screws - £5


Momo pedals - £5


Wiper blades - £2 each set


Seatbelts - £4


Rear seat bench - £5


PH2 steering wheel - £5


Also have some other assorted parts, so message me if you have a request and I may have it. I'd do a very good price on the whole lot if anybody is interested in taking it all and more.


All prices are for collection but postage is available at the cost of postage and I can post out straight away. Located in Northampton, just off the M1.

[bison3]

Took a couple of pictures of of the headgasket + parts as a few people had asked.
http://williamsclio.co.uk/forum/attachment.php?attachmentid=7187&stc=1
http://williamsclio.co.uk/forum/attachment.php?attachmentid=7186&stc=1

[luk3matth3ws]

Do you still have any of these bits left? Am local to Northampton and wouldn't mind having a rummage if possible

[bil909]

Do you still have the rack going?

[Scorge01]

Have you still the rear drivers caliper? Thanks

[bil909]

power steering pipes would be good thanks

[Ayli Carper]

PM sent re downpipe.

[Iceman2015]

Hi there mate do you still have cylinder head and is it in good condition? Thanks

[Rajk]

rear calipers??

[bison3]

Parts listed still available. Wasn't receiving email notifications so apologies to anybody who messaged me at the time last year and didn't get a response. I will now check on the forum regularly.

[pvsmark]

Do you have a passenger grab handle and the top screw from the handle on the door?

[andreas395]

Inlet manifold with throttle body
Downpipe with lambda,
PS rack
16v clocks
449 16v passenger side wing with ph1 16v badges and repeaters,

449 16v drivers side wing with ph1 16v badges and repeaters,
I will take them bits mate van pick up next week

[mitnik]

Need the stiffness support which connect the dogbone with engine oil sump.
It's the item with the red arrow on this photo.

http://www.clio-williams.net/Parties...teur/6_00a.jpg (http://www.clio-williams.net/Parties/Entretien/refaire_son_moteur/6_00a.jpg)

and the black bracket from a Clio Williams that goes under the gearbox upper mount.

It's the 3rd photo.

http://williamsclio.co.uk/forum/show...e-jc5-gear-box (http://williamsclio.co.uk/forum/showthread.php?40631-Williams-2-Breaking-F7R-williams-engine-jc5-gear-box)

[mitnik]

I will pay £100 if anyone can find the stiffness support and the bracket reinforcement.

[ianbirch]

If you contact Mat Brown via his Facebook page he should have what you need.

Regards Ian

[ianbirch]

Try this...

https://m.facebook.com/Clio-Specialist-843705932412754/

Regards Ian

[mitnik]

Thank you very much Ian.