PDA

View Full Version : Garage Clearout



bass_direct
11-08-2014, 10:27
Need a garage clear out...

Walbro uprated fuel pump fitting inside Ph1.5 / 2 housing so easy swap over - £50 posted

Phase 1 16v ECU (original, unchipped) £35 posted

Phase 1 16v ECU (with chip carrier) - £45 posted

Standard Clio Williams ECU - £70 posted

16v decat (x 3) - £20 posted each

Fibreglass bonnet, needs work - £35 collected

Tungsten bonnet - (Could do with respray) - £15 collected

Back window and rear quarter windows - FREE collected

Water hoses to convert oil cooler to non oil cooler - £30 posted

Full lock set with 1 key - £40 posted

Standard Phase 2 alloys with tyres (legal) - £75 collected

B & M Short Shifter fitted in housing - £75 posted

Oil pressure sensor - £15 posted

Lots of random stuff, I want it gone. Come down and have it all cheaper.

wardY
11-08-2014, 20:03
Any photos of the fibreglass bonnet?

Dean250
11-08-2014, 22:11
Is the williams exhaust different from the 16v (silly question!)? I know the manifold is, I would take a decat if it would fit a williams!

bass_direct
12-08-2014, 01:20
The exhausts are the same, but the cats/decats are different due to different angle flange on the Williams downpipe.

Pics of bonnet to follow

northy
12-08-2014, 12:39
Are you doing Oulton Park on the 27th?

bass_direct
12-08-2014, 15:58
No mate

Dean250
12-08-2014, 21:41
Ok mate thanks for that, i knew it was a stupid question!

16v_paddy
12-08-2014, 22:30
Any photos of the fibreglass bonnet?

Here you go

http://i444.photobucket.com/albums/qq165/16v_paddy/2013/2013-06-15144327_zps4b9d84ef.jpg

bass_direct
13-08-2014, 08:50
Oil pressure sensor sold!

wardY
19-08-2014, 10:37
How does the bonnet fix to the car mate.. bonnet pins or original fixings?

bass_direct
20-08-2014, 15:17
With bonnet pins

wardY
20-08-2014, 17:45
With bonnet pins


ok cool where abouts are you if I can collect?

16v_paddy
20-08-2014, 18:03
Uses the original fixings at the front actually, needs pins for the back part of the bonnet :winkey:

wardY
20-08-2014, 19:57
Uses the original fixings at the front actually, needs pins for the back part of the bonnet :winkey:

Where in Nottingham are you mate, anywhere near Selston?

16v_paddy
21-08-2014, 12:01
Where in Nottingham are you mate, anywhere near Selston?

On the ring road but Selston isn't a million miles away

Squeak
21-08-2014, 12:44
ok cool where abouts are you if I can collect?

It says under his username mate. Romford Essex.