PDA

View Full Version : Radiator and header tank replacement



Hoppo1979
27-07-2014, 18:24
Hi guys, I've got a new alloy radiator to fit together with a new header tank. Any tips? I know the 205 gti I had had lots of bleed screws on the system. Any words of advice will be appreciated. I'm wanting to flush out the system, replace the bits together with new coolant.

Hoppo1979
27-07-2014, 18:32
http://i1208.photobucket.com/albums/cc376/Hoppo1979/ae3239948c3cb08d6fc4a3396b24074b_zps5ee31606.jpg

Vandella
28-07-2014, 15:25
should be nice and easy.. only bleed screw in the system is on the bottom left of the rad in this pic.. replace these bits.. and fill up with crappy coolant.. run it for a bit/good thrash.. to get the temp up and water flowing.. flush through with water, then Renault green goodness.. the before steps can be done as many times as needed to get rid of the rusty looking water, if your car suffers from this...