MK1 Bump Strips

[Vandella]

Hey chaps,

Just wondered how these come off.. slide or pop.. I see the ones one the doors have screws.. do the door ones slide backwards and the rear ones forward ?

what's the process with as little damage made possible please?

I realise I may have to get new clips in case.. anyone remember the part number or have a linky for these?

[pvsmark]

Open the front door and slide the door ones off towards the back but remove the screw first, rears is the same but pull them forward and theirs no screw. I couldnt get any clips from renault but you can get them on ebay http://www.ebay.co.uk/itm/RENAULT-Trafic-Kangoo-Master-LOWER-SIDE-DOOR-MOULDING-EXTERIOR-TRIM-STRIP-CLIPS-/400425317021?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d3b35729d

This is for a willy 2 though so not sure how different a 1 is

[Vandella]

sweet, cheers for the info mate!!

[Chris197F1]

Handy this topic as ive noticed how mine are looking quite faded

[Coops]

my phase 1's strips tend to just fall off of their own accord :( lol!

[Vandella]

I had a spare set of valver ones.. sprayed them and they have come out great, and match the bits on my bumper now!! yay for colour matching/co-ordination :)

[Chris197F1]

What product did you use Vandella?

[Vandella]

http://reviews.halfords.com/4028/325175/reviews.htm
The above stuff.. but with the below to clean and make it bite onto the plastic nicely

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_17 2894_langId_-1_categoryId_165495


Then how its turned out below (photobucket link), i've done the bumper strips front and back, the side bump strips (yet to fit) and the scuttle with this stuff.. the hockey sticks will be next...
its kind of inbetween matt n satin finish..

I aslo did the black grill on the bonnet, which has a satin finish, as do the windscreen wipers.. just normal black satin from Halfords (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_20 3909_langId_-1_categoryId_165505)..£40-£50 in total with a couple of coats etc..

http://s1371.photobucket.com/user/dan_wood3/media/DSC_0082_zps8d8411dd.jpg.html?sort=3&o=1

What ya reckon?

[AND2386]

Well Done, Looks Great

[Vandella]

right, had a go at taking these off today.. well did a few other bits too but.. the broken one i thought id start with first.. was stuck on.. the clips doing sweet fa.. unfortunately in the process has pulled some lacquer off.. not a great deal but will be touched up professionally before having a full going over in the coming months.. anywho.. i cant seem to upload pics but im in need of both the rectangle bits that sit in the mouldings and the bits that are already in the rear quarter panel.. little white stumpy bits.. lol anyhelp in the right direction would be a massive help.. are these available through renault still? motor factors do 'em? Heeeeeeelp!!

Thanks

[Vandella]

http://s1371.photobucket.com/user/dan_wood3/media/DSC_0122_zps2b286c63.jpg.html?sort=3&o=4

the above is the only moulding clip that looks intact.. but the rest are duff.. as can be seen here (below)
http://s1371.photobucket.com/user/dan_wood3/library/?sort=3&page=1

cant really see the white stubby bits that are in the rear quarter but id the door cards of today n did the door handles.. but in the door it looks like they twist n pull out..??

[MatBrown]

I've tried and failed to find some of the clips from the actual strip. The ones Renault sell and the ones I found on the net are incorrect.

[Vandella]

http://www.ebay.co.uk/itm/181308149088?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

managed to get these which I've been assured, fit.. can't get them from Renault anymore, only the little white stumps that sit in the body. had me panicking for a little while that id have to bodge them on!!

Cheers for looking though Mat Brown

[MatBrown]

Nope, they won't work.
They are either too tall or will fit but just have a blank area for double sided tape to stick.

[MatBrown]

Had the same items in my watch list. Lol

[Vandella]

haha.. ok well.. worse case scenario.. ill have some clips for sale..lol