PDA

View Full Version : Got a new car to keep the williams 1 company, an oldskool friend :)



andreas395
11-08-2013, 18:23
since getting rid of the Williams 2 i got it in my head i wanted a clio v6 but after looking around most of them needed a cam belt change and there were another few things that i was not happy about on the cars i viewed, its about a grand to do the change it over as its an engine out job :( plus i would of got myself in more debt. So i have always wanted a Renault 5 gtt after looking i found one with low mileage and been very looked after it had loads of history, mot's, it had a full respray and engine rebuild with loads of new bits including a turbo about 10 years ago but since then it only done 1100 miles and sat in the garage and only used now and then so everything still looks new :)
The car has 75000 on the clock with old mots as proof its currently running at around 130bhp has a few upgrades but not over the top really pulls well no knocks nothing, done about 150 miles yesterday and im over the moon with it right little go kart :) and feels as fast as my Williams was to.
really checked around and there no rust the floor underneath has been treated so very happy, always loved them and i am glad i got this now and it only cost me £2300 so happy days :grin:
just needs 4 new tyres as they have cracked

here is a few pics

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00758_zps1549a83d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00759_zps76084d7f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00760_zpse1664550.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00757_zps2a0b31f6.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00766_zpse788b89a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00767_zpsd1a8f856.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00768_zps44b64792.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00770_zps173493d8.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00771_zps8fc92179.jpg


new calipers and hoses all round
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00753_zps4b535945.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00752_zpsd85868c3.jpg


under the engine
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00754_zps29085dd5.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00755_zps1194672d.jpg

new turbo

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00761_zps2b51e83d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00762_zps8b259cd4.jpg

engine bay
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00763_zps9e07812f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00764_zpsa47bb71a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00765_zps12853530.jpg

dre :)

Turlough
11-08-2013, 19:45
Nice one should be a nice companion

Dean250
11-08-2013, 20:33
Very nice mate, always loved the R5 GTT, gun metal grey with turbine wheels was my combo.

how come you sold the williams when you just got it sorted?

andreas395
11-08-2013, 21:08
Just got offered the right price mate got £3900 for it in the end after I through a few spare bits I had for it that I didn't need for the w1
plus I have the w1 in the garage so not that much of a loss for me plus this little thing has me grinning all the way feels rapid need to put it on a rolling road as it seems more then 130bhp

jamiecrookston83
12-08-2013, 09:33
that's not to shabby mate. I wish I had kept mine....

andreas395
12-08-2013, 13:06
Yeah the car is great fun mate after looking into things that turbo maybe a hybrid, I'm boosting high and it feels very aggressive, it all seems to be done right with the fueling and the main thing on these is the cooling system and all that is doing the job well but I still want to take it and put it on the rolling road see how things are running

andreas395
12-08-2013, 20:26
had a good look underneath the car today also checked the shocks and brakes it has spax sports suspension all round uprated discs and pads. it does sit slightly lower then normal, feels a lot firmer then standard to but i like it :)

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00772_zps0008db22.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00773_zps33fca39a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00775_zps50b761c8.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00774_zpsf4f1d91e.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00776_zpsda95b247.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00777_zps4c7866bf.jpg

now undercover till i next use it

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00779_zps3905f062.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00780_zps6ab7c220.jpg

a_hewi@yahoo.co.uk
12-08-2013, 21:08
great car with a great sound to them.

Hoppo1979
13-08-2013, 20:13
Absolutely stunning, but the old P600 tyres are cracking up big time and should be replaced urgently.

andreas395
13-08-2013, 22:25
Got some on order mate :) very rare size 195/55/13

jamiecrookston83
14-08-2013, 07:59
Where did you get the tyres? When I had mine the 195's were a nightmare to get a hold of

andreas395
14-08-2013, 15:54
Yeah no one makes them anymore accept uniroyal, manage to get a set for £200 fully fitted should hopefully be here tomo as the Pirelli's on there are shagged ashame really as there is about 6mm left on them all :(

jamiecrookston83
14-08-2013, 16:09
When I had mine. Uniroyal had stopped making them due to lack of demand and would only make them if there was enough of a demand. I ended up with 185's if i remember

andreas395
14-08-2013, 18:35
Maybe old stock mate he did mention that they are coming from a continental warehouse so maybe a few are stashed away

Hoppo1979
14-08-2013, 19:55
Got some on order mate :) very rare size 195/55/13

13" rims, that hilarious!

andreas395
14-08-2013, 20:42
Yeah it's all about keeping it original and more like a go kart ;)

jamiecrookston83
14-08-2013, 21:32
Yeah you're right it is a go kart

andreas395
14-08-2013, 21:51
After having the w2 in bits i thought that was a thin shell but this is even thinner no wonder they are so light think the 5s are about 750 kg great fun if you ask me :)

just don't crash one

andreas395
17-08-2013, 19:32
after getting mucked around with tyres i found a place in Germany that had them but for £65 each :-( so i found some mint turbines with new rubber for £400 so thought why not, love them to :-D

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00805_zpsfae5d2a2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00807_zpsdba88a1d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00806_zps663cf496.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00804_zps81ea219c.jpg

a_hewi@yahoo.co.uk
18-08-2013, 10:06
unreal

sk84life
18-08-2013, 22:31
mmmmm...turbines

Barry white r
19-08-2013, 15:12
Looks VERY smart,

Glad you got what you needed for the 2 mate.

andreas395
19-08-2013, 15:46
Cheers guys this will keep me busy for awhile :) next summer I may start the W1 but there is no rush as I'm going to town on that one :)

Chris197F1
19-08-2013, 16:48
Awesome mate, simply...awesome! :)

andreas395
11-10-2013, 15:07
cheers Chris :smile: time for an update been spending again :lol: going copy and paste what i have been doing to the 5

been getting a few new bits for the 5 lately some hing covers, new wipers, aux belt anti jump guide and belt, oil filter, plugs, sump plugs and rear molded badges



http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00827_zpsdd5c2c62.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00828_zps92146655.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00829_zps6c7f0806.jpg

old wipers http://www.rtoc.org/boards/images/new-smilies/disagree.gif
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00830_zps0a36ca58.jpg

new champion wipers old style http://www.rtoc.org/boards/images/new-smilies/agree.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00831_zpsf98b1813.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00832_zps2e01a28c.jpg

fitted my tax disc holder

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00822_zps2f43dfab.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00824_zps91795d8b.jpg

badges

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00833_zps2d09d70b.jpg

sprayed black

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00834_zps46468980.jpg

then painted by hand

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00839_zpse00e1132.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00837_zps8e394fef.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00838_zps81b9b1ab.jpg

then lacquered

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00840_zps3901c978.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00841_zps6bec8a6e.jpg

old badge off

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00836_zpsbc5f3e8b.jpg

let dry over night then some finishing touches before fitting on car

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00843_zps88caa9e1.jpg

not perfect but happy with the outcome

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00844_zpsb92f7130.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00845_zps853ae93e.jpg

andreas395
11-10-2013, 15:09
also got a new car for my car stand http://www.rtoc.org/boards/images/new-smilies/smile.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_1705_zpsa7ec2d95.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_1706_zps9d9dcedb.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_1708_zpsf91a7a8d.jpg
and a couple of pictures of the car at ace cafe

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_1682_zpsff14eafa.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_1683_zpscd0a61b4.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_1700_zps85e0f1ae.jpg

Had a few problems with the wiring to the starter motor so sorted that out also had to bodge my oil return pipe as it had split so got a new one to fit

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00854_zps771f5f1d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00855_zps64da2970.jpg

my turbo still looks very clean

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00856_zps80835303.jpg

my gauge pod

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00847_zps3dfba622.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00848_zpsbed72de3.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00849_zps90539372.jpg

some new goodies

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00876_zps7fb01f11.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00877_zpsee090b25.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00878_zps5dfc6bc3.jpg

just waiting on a AEM Wideband gauge and this lot will keep me busy for a day or 2
then i am ready to take it to Mark and up the boost and fuel http://www.rtoc.org/boards/images/new-smilies/smile.gif

andreas395
11-10-2013, 15:12
got a lot done this week fitted my pod with boost gauge and AFR, new fuel filter, oil and filter. choke cable, new oil return pipe, stainless front pipe and some new window clips for the rear window as i was driving and noticed it was flapping around http://www.rtoc.org/boards/images/new-smilies/eek.gif

old choke cable

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00879_zpsce1d48b8.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00881_zpsada88bab.jpg

my new alarm

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00882_zpsaea82fb4.jpg

new oil return pipe as i had to bodge my old one lol

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00883_zpsd9caac74.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00895_zps21e14ac4.jpg


boost gauge pipe
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00884_zps857742e2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00885_zps6a16cf97.jpg


boost pipe and ignition live wire for my gauges

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00886_zps0068f0c7.jpg


oil and filter change
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00887_zps7a1d27c4.jpg

cleaned my oil level and pressure sensors in a ultrasonic cleaner

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00889_zpsb224ff8a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00890_zps6efa4bdc.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00891_zps7c5d4748.jpg

my new dp gasket and window clips

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00902_zps1bc7b6cc.jpg

dp off

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00892_zps66a0c55c.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00893_zps138531c9.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00894_zps75ebec25.jpg

new one on

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00900_zpsd23f9088.jpg

new fuel filter locking nuts and door pins

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00896_zps7c9eeb82.jpg

old fuel filter

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00897_zps4577ff26.jpg

my missing window clip

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00898_zpsc664a6b3.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00899_zpse0f3b0d9.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00903_zps724b1606.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00904_zps16cf720b.jpg

my wideband gauge

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00921_zps9bfccb0d.jpg

all fitted with my pod http://www.rtoc.org/boards/images/new-smilies/cool.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00922_zpsc7f14a09.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00923_zpsfbc7a9e9.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00924_zps143316d5.jpg

took the car to Marky again to get everything set up nicely http://www.rtoc.org/boards/images/new-smilies/smile.gif the car was running very rich so carb had to come off and mark changed the main nozzle which had been drilled way to much in the past for a new standard one and drill the nozzle which should of been done http://www.rtoc.org/boards/images/new-smilies/agree.gif
The car is now running 16psi of boost and is fueling lovely and pulls well to http://www.rtoc.org/boards/images/new-smilies/cool.gif big thanks to Mark for his great work http://www.rtoc.org/boards/images/new-smilies/agree.gif also bought a phase 1 forge tank for my 5 as mark was selling it at a fraction of the price.

http://i1347.photobucket.com/albums/p714/dre_williams1_2/56718AF1-1C00-44CC-A48B-95AB6DF1831C-1428-0000017C328A8D7B_zps4c6c98bd.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00934-Copy2_zps484a1fe8.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00935-Copy2_zps548663f3.jpg

also got a few more goodies http://www.rtoc.org/boards/images/new-smilies/smile.gif

Bread bin intercooler

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00936-Copy2_zps0b58cbda.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00937-Copy2_zpsa5a20dbe.jpg

new top rad hose

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00939-Copy-Copy_zps9d5a0de6.jpg

some decals from France

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00927-Copy2_zpsee652952.jpg

andreas395
11-10-2013, 15:15
old intercooler out and fitted my cone filter

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00938-Copy2_zpsbd9dad7b.jpg

old coolant bottle bracket off

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00940-Copy2_zpsa58f7e29.jpg

new phase 2 coolant bracket

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00941-Copy2_zps6033730e.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00942-Copy2_zps304fb693.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00943-Copy2_zpsc278bad3.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00944-Copy2_zps99cd0022.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00945-Copy2_zpsf8deb04e.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00946-Copy2_zpsf68252d1.jpg

i just did not like the coolant bottle there so i moved it lol

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00949-Copy2_zps4398c00b.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00956-Copy2_zpsadc100c0.jpg

much better http://www.rtoc.org/boards/images/new-smilies/smile.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00975_zps07768afc.jpg

new drivers side seat belt

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00957-Copy2_zpse4dab66d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00958-Copy_zpsab18544f.jpg

new clock dials and tow eye cover from the RTOC shop
i saw someones car on here with the french flag on the tow eye had to copy it http://www.rtoc.org/boards/images/new-smilies/rolleyes.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00959-Copy_zps17c7fd62.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00964_zps6eb78b72.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00966-Copy_zps4e1b3902.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00969_zps43c2017a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00970_zpsbc282f4e.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00971_zps01f71976.jpg

looks so much better

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00972_zpsc1db5c54.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00973_zps7abe89c9.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00974_zps9e0a6527.jpg


got a few more little bits done had to move my header tank forward as i forgot i had a strut brace in the garage so got my mate to come round and weld and mod the tank bracket he also made me a heat and rain shield for my cone filter as i have vents in my bonnet so all good now http://www.rtoc.org/boards/images/new-smilies/agree.gif also bought a battery cover for the drivers side to looks better then the gap


heat and rain shield
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00979_zps5050c420.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00980_zps633dd570.jpg

welded bracket

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00981_zpsd856916d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00982_zpsee5a843f.jpg

battery cover strut brace on

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00983_zps7708a5cf.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00984_zps4a5293b0.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00985_zps928fee25.jpg

heat shield on and header tank fitted

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00986_zps11875233.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00987_zpsc0021e29.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00988_zpse2290c71.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00989_zpsca140b79.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00990_zps8c66beef.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00991_zps6e4df794.jpg



http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC00992_zps08b221bd.jpg

got my new alloy carb elbow from France looks good quality hopefully fit it later depends on the weather

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01001_zpsdd297083.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01002_zpsa88cc086.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01004_zps43862d6b.jpg


that's it for now :)

Chris197F1
11-10-2013, 15:50
That engine bay is looking sweeeeeeeeeeeeeeeeeeeeet now Andreas! Top work mate as always

Daz.
11-10-2013, 15:55
This is stunning mate well done, Turbines just do it for me :)

That painted badge ruins it though! do a a better job!

andreas395
11-10-2013, 16:41
That engine bay is looking sweeeeeeeeeeeeeeeeeeeeet now Andreas! Top work mate as always

cheers mate :-) you got a Williams yet ?

andreas395
11-10-2013, 16:44
This is stunning mate well done, Turbines just do it for me :)

That painted badge ruins it though! do a a better job!

lol i am on the hunt for the Renault part of the badge the gt turbo bit i can live with :winkey:

Chris197F1
11-10-2013, 16:50
No theres none around at the mo within budget or meet my needs. There is however a nice 182 I have my eye on so dont know what to do :(

andreas395
11-10-2013, 17:01
get the 182 mate and sell it when you find the right Williams a few of my mates have 172 and there great little cars

andreas395
17-01-2014, 07:49
time to update got alot more done on the 5 :) will cut and paste it up to date

andreas395
17-01-2014, 07:50
got a few bits done today flushed the coolant system for a good while need to fill up with coolant tomo and bleed once i do a water pump change to.
Changed the thermostat and bleed screws as they were leaking and causing me big issues on the m25 a few weeks ago with air in the system http://www.rtoc.org/boards/images/new-smilies/eek.gif had to stop 4 times and try an bleed the air out with my sock over the header tank and blowing through the header tank http://www.rtoc.org/boards/images/new-smilies/redface.gif with my bonnet flapping all over the place from the lorrys while on the hard shoulder was not happy to say the least

got a few new bits to put on, will finish off tomo if the weather is ok

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01049_zps16a70dfd.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01050_zpsd4f31a01.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01039_zps571c09b6.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01038_zpsfce438e1.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01051_zpse595512e.jpg


front grill off make life easier on the bottom rad hose

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01055_zps4286ab72.jpg

http://www.rtoc.org/boards/images/new-smilies/eek.gif seen better days

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01054_zps4dc3dcc1.jpg

new one on with rotor arm

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01057_zpsd6ad635a.jpg

carb elbow fitted and brass bleed screws

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01052_zpsd55619de.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01056_zps6284841c.jpg

got some door cards the other week some phase 1 rears as mine are sagging phase 2 type and some phase 1 fronts refurbished by the previous owner just waiting on some new speakers then i will fit them when i have the time

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/KGrHqNrkFIQLnGiPBSLzvB0nw60_58_zps4f90c195.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01040_zps8b22fceb.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01041_zpsade3b17d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01042_zps85827bda.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01043_zpse461b7cd.jpg

hopefully the weather is better tomo then i can get the water pump done

andreas395
17-01-2014, 07:52
got a bit done today done a system flush as i put in speed flush the other day but by time the engine fully cooled so i could flush it was dark. I then fitted the water pump, waiting on some new hoses to come then i can finish off

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01059_zps7b5d62ac.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01060_zps19837c9a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01061_zpsd37ef1ec.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01062_zpsf277b64a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01063_zpsafe47713.jpg

old water pump off

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01069_zps71008338.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01068_zpsaf483783.jpg

new water pump and gaskets

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01070_zps8eb3b19f.jpg

as it was easy access thought i would change the oil filter

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01071_zpse25b2df8.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01072_zps350b38ed.jpg

new temp sensor and thermostat

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01073_zps6438b90e.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01074_zpscae80ac5.jpg

new water pump bolts

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01075_zps5ece765c.jpg

water pump all bolted on with new belt

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01076_zpse8b17105.jpg

new blue ht leads on just need to tidy them up with some cable ties

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01077_zps2e9aaf52.jpg

coolant system all sorted now and working a treat http://www.rtoc.org/boards/images/new-smilies/cool.gif got my hoses to and changed them to, still got to do a little tidy up with a few things

re rooted my boost pipe instead of going over the top

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01084_zpsf25d46b6.jpg

new coolant and breather hoses

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01085_zps7c449ecd.jpg

tried to fit my old air box but it just don't fit with the bread bin intercooler so just going to keep the cone filter

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01086_zps57b3727c.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01088_zps34c551e4.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01089_zps35bbc40f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01090_zps323506a1.jpg

cleaned

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01091_zps59c156a3.jpg

new relay

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01092_zps34041d2b.jpg

pipes all fitted

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01093_zps122cad53.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01094_zps30683e82.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01095_zps04348faf.jpg

changed my wipers as the straight ones at the end were useless just need to get some bolt caps for them

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01096_zpsdc1c0174.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01097_zpsa4e79150.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01098_zps0e6ba77d.jpg

got some Avo springs 30mm drop as i dont like the drop and feel of the springs on there at the moment my spax shocks are good but the springs are to harsh and low, might as well change the top mounts and bearings to so got them to hopefully do them tomo

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01100_zpsa75380c0.jpg

andreas395
17-01-2014, 07:54
got some HT lead clips

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01101_zpsb92e25a2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01102_zpse3c3d626.jpg

wanted to change my springs today but it looks like one of my shocks has had it plus i couldn't believe the amount of floating with the springs that were in there http://www.rtoc.org/boards/images/new-smilies/eek.gif i did hear clocking noise now a ten now know why
i have read that lowering springs with the phase 1 set up can be a bitch the new Avo springs look near on identical as the spax so i need to get some new front shocks and sell these new springs http://www.rtoc.org/boards/images/new-smilies/rolleyes.gif or get coilovers and sell both sets

never even needed spring compressors to take off http://www.rtoc.org/boards/images/new-smilies/sad2.gif
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01103_zps020a5ec2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01104_zps3053d3d7.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01106_zpsd3b2d2ce.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01107_zps0c89a289.jpg

other side http://www.rtoc.org/boards/images/new-smilies/eek.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01110_zps49ffc903.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01111_zpse9ff0be4.jpg

avo on the left spax to the right

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01105_zps68210e7b.jpg

changed the top mounts and bushes

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01108_zps6e640e5c.jpg

new
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01109_zpse5a336e8.jpg

2 sets of springs and no shocks lol

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01112_zps3a33a96a.jpg

stripped the arb bushes got new ones on order

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01113_zps100acdea.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01114_zps2201a7c7.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01115_zpsb0c07cd9.jpg

will update when i have got my shocks or coilovers then no more spending as i have spent a small fortune lately http://www.rtoc.org/boards/images/new-smilies/rolleyes.gif

for my later project got a t25 hybrid be a while till i fit this with some cams and things http://www.rtoc.org/boards/images/new-smilies/agree.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01078_zps8b4d0eab.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01079_zpsefe04107.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01081_zpse5434290.jpg

ot a few more bits for the 5 managed to find some shocks for £40 going to fit my springs, with new top mount ring and bearing and give them a paint over

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01131_zpse1bbba01.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01132_zpsd539ea2e.jpg

going to fit these on them

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01100_zpsa75380c0.jpg

i put my sticker on so painted it all black first

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01119_zps3d77e32f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01120_zps96a82159.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01123_zpsbd145589.jpg

got some powerflex arb bushes will fit them once i fit the shocks

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01125_zpseabed7ef.jpg

got myself an oil cooler with thermostat

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01126_zps767dacfd.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01127_zpsd70cc1ef.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01128_zps8561c8fa.jpg

also got my low temp radiator fan switch and rear window sticker http://www.rtoc.org/boards/images/new-smilies/cool.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01130_zps86c4fba6.jpg

stripped the spax shocks i bought as im going clean them up and put my springs and new top mount rings and bearings.

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01153_zpsb6b9fcd3.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01158_zps3c000e18.jpg

old springs

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01156_zps8d9aa068.jpg

new springs

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01157_zpsb79fc3a7.jpg

you can see the difference in the phase 1 and phase 2 top mounts. The bottom half is the exact same on both phase's its the top that's different.

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01154_zpsd62f4eb2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01155_zpsdfbfc20d.jpg

so i just used the bottom half off the phase 1 and im going to clean up the top half off the phase 2. Not got much else done, in no rush as the car is off the road anyway.

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01159_zpsae4c208e.jpg

also got a few more bits for the 5 a few were Christmas presents form the misses http://www.rtoc.org/boards/images/new-smilies/smile.gif

got a breather pipe restrictor as im missing the large one and a new relay

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01151_zps24911f22.jpg


got a breather pot need to polish it up

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01148_zps9f4b9c4e.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01147_zpsba559c11.jpg

piper cam 270

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01160_zps2ccc56be.jpg

ot a new air filter for Christmas as i wanted one enclosed and since fitting my bread bin intercooler and moving my header tank there is no chance in fitting my original air box http://www.rtoc.org/boards/images/new-smilies/sad2.gif and as i have vents in my bonnet there is always a chance of water getting to the cone filter i have nowhttp://www.rtoc.org/boards/images/new-smilies/disagree.gif so this one will do me nicely was imported from italy

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01161_zpse0a672a6.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01162_zpsdf9b0be7.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01164_zpsd9b96aef.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01166_zpsee052c40.jpg

also got a t shirt off the misses and some key rings to

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01168_zps4167a320.jpg



http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01173_zpsb3c31e66.jpg

bought myself a oil catch can to

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01169_zps1b806238.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01170_zpsef571d72.jpg

so i am going to busy for awhile http://www.rtoc.org/boards/images/new-smilies/smile.gif

andreas395
17-01-2014, 07:55
sorted my top mounts out and fitted all my shocks together today

grit blasted first
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01206_zps2ba96aca.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01207_zps53efe9a6.jpg

treated with rust remover

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01208_zps39d7c946.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01209_zpsef12b1c3.jpg

zinc primer

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01210_zps8b2460c2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01211_zps84f03641.jpg

painted black

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01217_zps81be2e55.jpg

all ready to go on the car

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01219_zpse0e4b6ba.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01218_zpsc16810d3.jpg

will update when all fitted with some new powerflex arb bushes

got a bit done this weekend fitted the suspension arb bushes and new air filtter

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01236_zps929a8073.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01237_zpsc37ea84c.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01238_zps1b17d6f1.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01239_zps3236fe06.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01246_zps8c10f683.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01247_zpsc41709f5.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01248_zpsd78d3891.jpg

had to cut my new phone hose as the original one i cut was to short. It was quite tight but all fits well now and i have not got worry of water getting through the filter from the bonnet vents http://www.rtoc.org/boards/images/new-smilies/agree.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01220_zps2c95655d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01232_zpsb560fd69.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01231_zps12cbd9f5.jpg

had to charge the battery as it was low not stated for around 2 months

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01230_zpsdb6df1a2.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01229_zps68f704fd.jpg

The front was much lower the the rear and always caught bumps and was so hash did not like it at all. Car sits so much better now will settle a little more after a while and when driven

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01250_zps2682bd86.jpg

ran the car for a good half hour and moved it up and down my drive a few times
everything seems sweet http://www.rtoc.org/boards/images/new-smilies/cool.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01252_zps0256231f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01253_zps57a330e2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01254_zpsf10da8c6.jpg

then wiped her dry and put the cover back on.
Tax runs out end off month going sorn it till aprill and the weather is better

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01255_zps553443a2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01256_zps10a74698.jpg

dre http://www.rtoc.org/boards/images/new-smilies2/niceone.gif

Chris197F1
17-01-2014, 09:23
Outstanding work Andreas, I applaud how you do all the work yourself, wish I had half your knowledge! =D>

Dan-valver
17-01-2014, 23:33
Really liking the turbines on this!

'There's more to life with Renault' sticker is awesome too!!

andreas395
18-01-2014, 01:17
Outstanding work Andreas, I applaud how you do all the work yourself, wish I had half your knowledge! =D>

Cheers mate :)

martynp
19-01-2014, 16:29
Hi where did you get your sticker made for your Renault badge?? I need 1 as well :smile:. Your 5 looks stunning mate that's the best colour 5

Jamie.
19-01-2014, 18:17
Lovely.

mopa
24-03-2014, 11:04
awesome:winkey:

andreas395
29-04-2014, 11:28
cheers :grin:

time to update

got a few more bits of bling for the 5 plus spent a good hour with the dremil polishing my oil breather pot

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01268_zpsfd7a8715.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01269_zpsd4816203.jpg

not perfect but a lot better http://www.rtoc.org/boards/images/new-smilies/agree.gif first time i have ever polished anything to tell the truth

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01271_zps4bc2bd50.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01274_zps5913d628.jpg

got some original rear badges only going to use the renault part as my gt turbo bit looks ok

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01267_zps1190af47.jpg

rear exhaust surround as the previous owner had made a cut in the rear bumper and i always hated it so this hides it well http://www.rtoc.org/boards/images/new-smilies/agree.gif
also got a some bling for top of radiator http://www.rtoc.org/boards/images/new-smilies/cool.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01280_zps871d6645.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01282_zps17ec01dc.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01283_zpsd0483c7f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01279_zps96df6b21.jpg

Changed breather pot and put my ninja cap on with my new elf sticker

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r52_zps00d629f6.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r53_zps5d67330b.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r51_zpsa0e519d2.jpg

Some bling for top of rad http://www.rtoc.org/boards/images/new-smilies/smile.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r54_zpsfd28aa9f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r55_zps7962e80d.jpg

Changed my heater knob as it broke on me a few months ago

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r56_zps4a2eeff5.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r57_zps99faf872.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r58_zpsed23b6c8.jpg

Also changed the passenger side seat belt so there both new now

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r59_zpsc20c7682.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r510_zps1b9144ed.jpg

Put my stickers on the car plus put my chrome surround on, hides where the bumper was cut in the past even though I had to cut it a bit more to fit. I'm happy with it so all good http://www.rtoc.org/boards/images/new-smilies/agree.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r512_zpsa28216d7.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r511_zpscea9857f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r513_zps221d4511.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r514_zpsc561638d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r516_zps948c2a96.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r515_zps186a5fea.jpg

Took my moulded badges off and replaced with originals

Old

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r517_zps152e093a.jpg

new http://www.rtoc.org/boards/images/new-smilies/agree.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r519_zps6ea756cc.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r518_zps13e5fedc.jpg

Then I noticed I had a some play in my steering, drivers wheel with a slight knocking. First I thought wheel bearing but turned out to be the drivers side track rod and the ends could do with changing to.
Got the bits from gsf

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r520_zps907667b9.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r521_zps5517cea5.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r525_zpsd985b802.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r522_zpsce6f0d95.jpg


new
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r523_zps1ef79834.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r526_zpsf748150f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r527_zps0eed0020.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r524_zpse3dd65cb.jpg

tracking all done and taxed http://www.rtoc.org/boards/images/new-smilies/cool.gif
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r528_zpsd3a5d89f.jpg

Got myself a dump valve for £50 new the other day so thought I would fit it http://turborenault.co.uk/styles/default/xenforo/clear.png
Had to change my silicone hose for one to fit the valve lucky I had a spare which came with my intercooler

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r529_zps34190f24.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r530_zps1621edf6.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r531_zps42782e30.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r533_zps560b6e4a.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r532_zps264ff842.jpg

andreas395
29-04-2014, 11:30
Fitted some badges to my floor matts

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r534_zpsc0454ca3.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r536_zps0066eeaf.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r535_zps19492559.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r537_zps1cb1d67c.jpg

Checked my camber as I never have since putting my phase 2 set up on, was just a quick check should of taken off my centre caps really.
Both are at just over 1 neg camber and does handle better then it did with this set up

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r538_zpsb9c8fce6.jpg

got a new boost controller , some new washers as I had a slight leak from my rocket cover plus changed my sump plug washer to a copper one also with an oil change plus managed to do 1 door card with some bigger speakers fitted with adapters

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r539_zps044a155a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r540_zps04a09b2f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r541_zpsdb4ff580.jpg


all fitted and set up to 15psi
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r542_zps5675e862.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r543_zps952ea90a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r544_zpsca83a9ce.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r545_zpsb1275615.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r546_zpsa70ecc2c.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r547_zps5c9a754c.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r548_zpseaa9b21a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r550_zpsdc8af9fc.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r549_zps27d99c7c.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r551_zps4043b360.jpg
the other door card and speaker fitted also cleaned the car inside and gave it wax http://www.rtoc.org/boards/images/new-smilies/cool.gifto

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r552_zps2633ab29.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r553_zpsdb5bac3a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r554_zps23b3bdb0.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r556_zps25a9a321.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r558_zps144d4017.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r557_zpsd015be3c.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r561_zps03bb821f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r560_zps6f508780.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r567_zpsa15876e6.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r563_zps9bbfb3eb.jpghttp://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r564_zpsff67a093.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r562_zps28ccb7a0.jpg

andreas395
29-04-2014, 11:31
took the car up to Dynodaze rolling road at hinckley
I made 133bhp and 154 torque at 15 psi of my little t2.
I done 240 miles yesterday as i drove to London last night to everything running sweet as a nut http://www.rtoc.org/boards/images/new-smilies/smile.gif pulls nicely no overheating issues just i think i need to do a rear wheel bearing but that's it http://www.rtoc.org/boards/images/new-smilies/smokin.gif

here are some pictures


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r572_zpsf2c1ba61.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r569_zps145a5cd3.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r574_zps4b912905.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r575_zps24588361.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r570_zpsee8f0f67.jpghttp://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r571_zps3f3d7a0c.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/r573_zps95cb9995.jpg

Chris197F1
29-04-2014, 11:35
Its an absolute credit to you mate, such a stunning car =D>

jamiecrookston83
29-04-2014, 11:40
so so so so so so so so jealous...

andreas395
29-04-2014, 11:44
thanks mate ;-) got to say i do love this car really enjoy driving it, well up there with the Williams for FUN :rally:
hows the Williams getting on mate im still buying stuff for mine in no rush to do it as i need a bigger garage so going to wait

andreas395
29-04-2014, 11:48
so so so so so so so so jealous...

lol still got to love a mint Williams mate i have my 2 back at the mo doing some work to it and i really miss it still mint

Chris197F1
29-04-2014, 11:50
thanks mate ;-) got to say i do love this car really enjoy driving it, well up there with the Williams for FUN :rally:
hows the Williams getting on mate im still buying stuff for mine in no rush to do it as i need a bigger garage so going to wait

Not bad mate, just struggling with an idle issues where it cuts out after around 30 seconds, cleaned the ISCV and even tried a replacement with no luck. Also im not strong enough to remove the lambda sensor ha ha :D

andreas395
29-04-2014, 12:08
lol lamba sensors are always tight to get off, try locking two spanners together to give you more leverage

Wobba
29-04-2014, 12:21
Wonderful car there, I really miss mine!

andreas395
29-04-2014, 12:40
Nice one mate, see you at FCS :)

Daz.
29-04-2014, 16:33
Good god that looks nice - the turbines finish it off soooooo well!

andreas395
15-05-2014, 00:01
cheers Daz

over the past week i have done the rear wheel bearings and started to take my side skirts and arches off the car.
i did not know what to expect as we all know it hides alot but im happy with the car its solid just needs a Little welding which is getting done on the weekend. So i started to rub and treat any surface rust that i could see and started to underseal when happy

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3055_zps6899d575.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3056_zps342ec338.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3057_zps99e6fda8.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3058_zps50092b09.jpg

had to drill out the rivets i have some stainless nuts a bolts on order


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3120_zps7340fe05.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3121_zps5ae2f4c6.jpg

arches all round are in great condition http://www.rtoc.org/boards/images/new-smilies/cool.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3123_zps14ef96d5.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3126_zpsbf5bcc0b.jpg

this is the bit that needs welding going to cut this all out and re plate
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3127_zpsb7f39f50.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3128_zps1b96a961.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3129_zpsfebc922c.jpg

the goods http://www.rtoc.org/boards/images/new-smilies/smile.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3133_zps206795e0.jpg

rubbed down any surface rust and treated. zinc primer ed and undercoated

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3134_zps5fc26234.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3135_zps0efbec85.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3137_zps09550415.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3138_zps7c8f722d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3139_zps50c65cae.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3140_zps567e1ee2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3142_zpsc46da58a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3144_zps39661635.jpg

other side

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3149_zpsebc4951f.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3150_zps234389c8.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3151_zps7278667e.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3152_zps323ff6fd.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3153_zpsfb955abe.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3154_zpsb9547216.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3155_zps96f207f7.jpg

this side had a little hole in the seal the rest is solid http://www.rtoc.org/boards/images/new-smilies/cool.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3158_zps2576624e.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3160_zps0d6c9417.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3161_zpsdcfca49f.jpg

going to strip the inside tomo and change my rear cards and take the seats and carpet out to

talkingfish
16-05-2014, 08:09
Electric blue has to be my fave 5 GT Turbo colour.... great thread her.. keep up the good work!

andreas395
27-05-2014, 17:14
cheers mate

well after finding some water in the car and the matrix heater leaking thought i go on the mission and rip the dash out http://www.rtoc.org/boards/images/new-smilies/cry.giflooks like its been leaking for a good few years and rotted some of the floor to http://www.rtoc.org/boards/images/new-smilies/sad2.gif so my mate will be busy this weekend cutting and welding my car good old french motors sills and arches solid for once and now this http://www.rtoc.org/boards/images/new-smilies/rolleyes.gif glad i have done all this because once its done it will be a solid motor http://www.rtoc.org/boards/images/new-smilies/agree.gif my Clio Williams was worse and saved that from getting scrapped and still looking mint now so let the restoration begin http://www.rtoc.org/boards/images/new-smilies/cooter.gif




where the leak was http://www.rtoc.org/boards/images/new-smilies/cry.gif


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3188_zps77ce34ce.jpg



new matrix in

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3201_zpse0eca2b6.jpg



inner sills are solid

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3209_zps042ccb27.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/IMG_3210_zps24fd7dfc.jpg

andreas395
27-05-2014, 17:17
got alot done to the car nearly all back together and im happy that its solid again http://www.rtoc.org/boards/images/new-smilies/agree.gif

this is where it leaked from the window where it was not sealed properly http://www.rtoc.org/boards/images/new-smilies/disagree.gif was running down and water was sitting behind and rotting

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/0308DF14-843B-4FAB-A466-0022BB16C3A5_zpsvphi8lb9.jpg

this is where the matrix heater was leaking to http://www.rtoc.org/boards/images/new-smilies/disagree.gif so if it was not for these fooking leaks car was solid

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/6C3580DD-B658-49F6-9710-E639D3E033F5_zpsqvxornmv.jpg

so the cutting and welding began


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/2D3EBBC8-1E79-4953-BFA2-6B6002E3935E_zpsaqpiu589.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/47AA419C-FDF4-45B3-84D9-EFFA19B1A018_zpsyv3po6cb.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/6DEE2B93-6E3A-46AE-B3BA-D71997E1D63D_zpsxybfi7yy.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/A771F819-BD13-4CF0-9F5D-3134EB48EE6C_zpsknrt1izt.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/0586B752-3F70-4194-8C0B-88AE5681CCBB_zpseq7cnmki.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/8EAD5A8B-DF07-43DF-8930-0B6328915687_zps5h9uglui.jpg

had to double skin this bit

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/B1D925C2-6665-42A8-8478-7A629BBA2916_zps1sy3lopx.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/9C43C81A-B74E-4BA2-8DF0-E7B45B3595D4_zpst6sbnqob.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/E34A2A6D-8136-4105-B854-B5F06DDED40C_zpsnetm4l0u.jpg

rubbed down all the surface rust and treated

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/510AD4E0-C4A5-4223-83B7-7FC85A7C8ACB_zpsih8gqlqn.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/932280A4-8F25-4869-A690-0B97076A8258_zpsinduovx8.jpg

carpet cleaned

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/8959FBD2-C64F-45C8-B25D-E263A2301B4C_zpsgm79aucl.jpg

outside sills all done

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/5D30313A-6F2B-493A-8AE0-7D94EA9910DC_zpsj0nk3fzz.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/EAA0768C-A8EE-4C3C-A6CB-6F86E630C678_zpsgz3ihhyv.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/09EBF9C2-E906-4FCA-A526-3BA887086A17_zpsqmaxsura.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/72EDD698-ED54-47FA-86F7-2C403B52F531_zpscccgjnyv.jpg

drivers side

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/556724E2-B5D0-4CBC-A0A9-149704487B55_zpsb2amxokg.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/B59870C7-F02A-4B67-8395-163516082564_zps1wksjaj4.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/953FF554-DF0C-4E21-903C-AB9B05A86BF8_zpsy9jy4x7b.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/B8A72992-DFC5-4A13-952E-7566E74FDE17_zpsdy4yqztx.jpg

rubbed down all the floor of any surface rust and treated and painted plus i re undesealed the bottom of the car

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/1421A7AB-3D05-4E68-85F5-3A0C588508E4_zpswwft0djb.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/56264F19-F009-4998-BFB0-DC2136CF7646_zpsmkprl3it.jpg

andreas395
27-05-2014, 17:18
scuttle panel all sorted and back together

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/A26D899B-259F-4681-91DF-747F2266AD74_zpsj2fgzcaj.jpg

got some phase 1 cards as my phase 2 cards started to sag

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/19108770-E6D6-496F-BCB8-54FF451A3C0E_zpscwfdrxmg.jpg

[IMG]http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/33864E48-1D72-4E2E-ABEF-5F385FBC43D4_zps5ahmu0kh.jpg[/IMG

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/446CC12A-8F69-4C6F-8B98-003865A38477_zps7bliamjt.jpg

and this is where i am at the moment

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/7A30DE47-D37E-4FCB-96DF-74E137DC479E_zpsjaikbasy.jpg

dash is back and everything is working http://www.rtoc.org/boards/images/new-smilies/smile.gif had the car running and bleed the system to
just got to put the seats put my side decals on and kit on

andreas395
06-06-2014, 15:46
Managed to get a bit of time to put the seats back in the car and clean them to

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/36EB8C02-5986-4515-BC36-5F889DF1AF51_zpsxkusy63o.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/2D2F0368-8B2C-4380-925E-FCC52ECA0E08_zpso3vee3ty.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/28384EEB-B88F-44CA-8D92-BEBC904F2243_zpsarogkmpo.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/174C440F-CE0E-4A44-8466-711E4B94C3B2_zpstirm4exj.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/E4B6223F-9525-452B-9EC5-BC5847BED5DC_zpsfvrzdht6.jpg

Sorted my sills all sealed and protected ready for side skirts to go on

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/D32C65BF-75CB-4603-A2BF-BB490A91BAA7_zps4izwzeuq.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/E294B4EA-8A6A-4B17-96D2-7604A2D433B9_zpsadobuhl6.jpg

Got some stainless nuts bolts and washers for my skirts
http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/931B5BA3-B7FF-47F9-8712-8BBE171AE5AA_zpsbvapok88.jpg


Both skirts back on and I am going to attempt to put the decals on myself http://www.rtoc.org/boards/images/new-smilies/eek.gif hate doing stuff like this

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/60233DDD-748A-4643-A50C-157F908202BB_zps1ugx3ycb.jpg

Had a go putting the first bit on, the door is going to be the worse part to do has to be trimmed to

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/33187BB5-E067-4ADA-908C-3F1075FCB611_zpsqvfnz9ul.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/CE32B759-15D8-4A57-8899-CA558A2A7BBE_zpsjkk71gem.jpg


Got the rest done just need to put the kit on once I have cleaned and waxed the whole car

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DB5BA0FC-5358-44BD-8FE8-78A2E3FCDA0B_zpsnxgvhylo.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/65D5AF9A-425B-423E-A7F1-F2818B4AA5E8_zpsvywdypcf.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/695A807C-8FD3-4061-AF16-5600D8C8B591_zpscfmpuqcy.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/768C351B-FB9E-4579-A0E1-BD2581E77C4C_zpsyxa2dvay.jpg

Got a lot done over the weekend gave the underneath an other good underseal so that's all done now, also washed, clay, polish and will wax it on Friday before FCS all the kit is back on now to

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/7792A491-9489-44C1-B955-B7E743F84684_zpspnznrsyh.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/1E03C070-1578-4CE5-8438-6CDFE337463B_zpsy5ffppo7.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/9570B2BF-3167-41CA-9987-4B1AAE8838EE_zpsg2l2d4z2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/4F7227BA-1BAC-4988-885B-A013E0F314E4_zpslnbyklin.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/585B964C-F24A-4E5F-BEDB-67F28B6B01CC_zpss4zhdwu7.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/B9409669-18E5-4D9D-B269-36C518C876B8_zpsxkn5pjw0.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/1C13EC52-B748-468A-A5C2-89EA20E2D286_zpskkt48kdo.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/2C047E51-0475-410D-B76D-8D7E4BF97DE8_zpsvv7lfphx.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/BB611FBB-1B43-4060-B57C-7B1AFBC644DE_zpsqv17zfxt.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/17F7482B-7B02-4E42-8B8E-EE8D5B0E79D9_zpsrs2q61ac.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/011657E3-7E63-4355-B67A-64A5F451D453_zpsgfcsvcyr.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/6295DAB7-16AE-4B16-B982-5306137B7A9C_zpszrnjmmno.jpg

That's it all covered up till the weekend now will give it a good wax and clen the wheels on friday

Managed to change my steering joint and bottom ball joints also found out my rear shocks have had it http://www.rtoc.org/boards/images/new-smilies/frown.gif got some on order should hopefully be here today

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/3529782D-819C-4366-85CF-44E7076E9F22_zpsthkw933a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/0C614CD8-47E9-47FF-9833-148DCB4EB6CF_zpslbxqh8j4.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/3786BC05-BFA5-432C-B86A-326BD72FEC7A_zpsw9tfjupc.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/8306676F-8778-4916-B922-B1FA66073488_zpsnwfpnpun.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/647950B9-D832-43D2-A53D-E93A7EB37B5B_zps4s3cchqp.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/E91F49E6-CF41-40A7-AD3E-0733E47B30F7_zpsz3pccznx.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/324176D5-C38C-413A-96AB-C6DD1CBE08F8_zpstp9xkapm.jpg

Changed the shocks to some Sachs super touring, stiffer then standard setup saying that the shocks that came off were quite stiff, the passenger side was ok not leaking oil but the rubbers were fooked old Spax by the look of them.

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/716E55F2-AF62-4C4E-8492-62A6842FE100_zpsv5lmawf8.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/287D799A-0655-4425-ABF3-E8EFFE2AEF93_zps3a1eos0o.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/025C8C76-D59A-4A69-948C-4F62C724988B_zpsq3ywggb3.jpg

Took my front pads out as they were so noisy when braking so gave everything a clean and put some copper slip on the back of the pads, I know up rated pads are noisy so hopefully this works

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/4DA365C9-BB4C-478A-BBFB-3300125F604E_zpsg8ty4u8s.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/8BF9ECC9-CCE7-425C-AC4A-A5A20F4D23FD_zps2jefmf2j.jpg

Also got some seat plastics as my inner ones on my car were missing

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/0DE18B60-70EF-42A7-8237-DCA0C49709DC_zps1lvtmx4u.jpg

Fitted my inside covers so I now have all 4 the inside of my car is complete now


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/5B960E47-22B9-4A95-B963-329F4B20344F_zpsszuirszz.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/8FCE764D-7D21-4C0A-A2BF-57CBE5740A45_zpsq246dgnr.jpg

Gave the car and wheels a final gloss wax, car is now ready for FCS took it for a good spin all seems sweet

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/672649CD-B06B-4892-9AA6-F840FB885415_zpsrijttveh.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01287_zps3d5bd71b.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01291_zps8e44968a.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01289_zps65b7abbd.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01288_zpsb0525c14.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01290_zpse2e268c0.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01292_zps5eed6438.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01293_zps34e0f7f1.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01294_zps17ef85f1.jpg

See you all tomo let's hope it does not rain to much http://www.rtoc.org/boards/images/new-smilies/frown.gif

Wobba
06-06-2014, 18:28
Oh man, just epic! I love these cars! I MUST have at least a sit in it tomorrow! One of my old R5's used to have the louvred bonnet as well.

I still have a OEM backbox in my attic in good condition for an R5GTT I think.

andreas395
06-06-2014, 18:47
Yeah take it for a spin if you want :) what time you getting there mate still going to park with you lot :)

Wobba
06-06-2014, 18:52
Yay! I would love to drive an oldschool R5 again. You can drive mine too, trouble is the buckets are fixed and it's a bit of a handful at the moment too as I've messed up the geometry doing the clutch :D

I know if it is wet it will just spin right up when that boost comes along hehe.

I think I will get there about 8 a.m., with Summeh who is coming in his V6 as the Williams isn't quite ready for an MOT I believe! I've not been sent the map yet but I think we are just where Renault UK were last year to the right of where WilliamsClio was last year...I think...

andreas395
06-06-2014, 19:20
Ok mate cool yeah going to get there for about 9:30, think it will be wet tomo which is shite :( will come and find you when I get there.
v6, Williams and 5gtt next to each other would be a nice picture :)

Chris197F1
06-06-2014, 19:25
Must attend FCS next year just to see this car, wish the Clio was ready for it this year but never mind

Wobba
06-06-2014, 20:57
Ok mate cool yeah going to get there for about 9:30, think it will be wet tomo which is shite :( will come and find you when I get there.
v6, Williams and 5gtt next to each other would be a nice picture :)

Let it be so, number one. I'm sure we can move cars about for some epic pics.

andreas395
05-05-2015, 19:27
time for a long awaited update

Right time to update a few pictures of the car at FCS

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/76BEEE72-BF3C-4BA2-84A6-63F76BB98F45_zpsccmguqyw.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/A9D77DBB-DCEC-44BE-BB64-1983DA6A8598_zps3zvvw1ye.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/2514B659-94A9-416E-A9FC-53E70B9B1231_zpssddpki0j.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/AE8AAEB6-12D1-41AA-A120-0AD627DADC82_zpsczvi1agk.jpg

A few things I bought that day mostly of mike some switches new starter motor heat shield and a tow eye as mine are missing

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/7135C9AF-F990-4354-A3C5-4C3682AFC4D1_zpsrvsbqxhe.jpg

On the way back I broke down on the m6 manage to get it started after half hour think it was tdc sensor playing up

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/78088902-A487-4D60-8153-9D70A9FEACFD_zps5afswham.jpg

After breaking down thought I would invest in a new tdc sensor

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/8BDB4BB5-D9C8-4A5B-AB3E-605093D828FA_zpsogei9hcc.jpg



http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/CFB65C28-B590-4AD5-9B6D-E9AE06D062AF_zpsxiiuow2c.jpg

I fitted this the night before retro day at Santa pod so was hoping this was the problem as my test run was going to pod In the morning http://www.rtoc.org/boards/images/new-smilies/eek.gif luckily I got there and back with no problems http://www.rtoc.org/boards/images/new-smilies/cool.gif

Few photos at retro day Santa pod.
Great day out

http://i1347.photobucket.com/albums/p714/dre_williams1_2/84AB3EBC-ACC4-4D9F-AFCE-035106011555_zps7vwmu4vf.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/BF8CE005-D00D-4304-B56C-77320516DA31_zps6rmfxzqt.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/76FFDAEA-BF30-40B9-A3C2-F24C0AF65C40_zpsidqbrssn.jpg

andreas395
05-05-2015, 19:29
So over the last 8 months or so I have been collecting engine upgrades http://www.rtoc.org/boards/images/new-smilies/smile.gif and waiting for the nod off Markey mark to fit it all http://www.rtoc.org/boards/images/new-smilies/smile.gif well today is the day all this is going to mark to get fitted over the weekend http://www.rtoc.org/boards/images/new-smilies/smokin.gif

Hybrid turbo

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01078_zps8b4d0eab.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01081_zpse5434290.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/505C4DC1-E3D9-446A-B6F6-1595438F6FDF_zpssjotoc1n.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/0D71AA30-9FFE-43F2-83FD-B346C47382ED_zpsy4rk5pcw.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/989B85BA-594D-4E59-8835-BC3937A55417_zps3kik1aqv.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/F4271671-1AE3-4210-B0B9-0F2C2D448D5D_zpseymzcips.jpg

Oil cooler with thermostat

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01126_zps767dacfd.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01128_zps8561c8fa.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DSC01127_zpsd70cc1ef.jpg

Also got a piper 270 cam going in with this lot so with mark working his magic hopefully be getting a rapid little car back by next week http://www.rtoc.org/boards/images/new-smilies/biggrin.gif

Little update Mark still has the 5 as my liners were shot so I thought I would get some new liners and piston set also a bottom end gasket set, valve stem seals and a rev limiter.

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/00B1226D-980F-4A20-9249-C219687CF23E_zpsuxcawxaz.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/1AE8D78F-D39E-4B04-9C24-4CC808206876_zpsorelgrzf.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/42BF4CBF-8C27-429B-8290-5AA7013E2FFD_zpsyz7st7c3.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DADEA2FC-9377-467C-BD59-C5CC98B0B340_zpsvzh4ddp5.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/D372B24F-416A-4A16-AA24-7CFB313C4081_zps9ayqpt8r.jpg




Been a while since i have updated got my car back a few weeks back engine all done also got Mark to change my gear box oil

i will start from a few months ago

when i saw my car when dropping some parts to Mark

http://i1347.photobucket.com/albums/p714/dre_williams1_2/s3/6620E0DC-F73A-4C84-9684-59912C13C6CB_zps0jwszefu.jpg?1420935930435

some bottom end bearings

http://i1347.photobucket.com/albums/p714/dre_williams1_2/s3/9C40B524-F9CD-48E2-BBB4-2367A39876FC_zpsu8ele8r5.jpg?1420935930436

Refurbed mani as my studs on my old one had seen better days.


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/80F70F21-E75D-46D1-A502-73DE30CD011F_zpslmxkdvwi.jpg?1420934823008

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/83E0C2E4-671B-4D91-9901-C5C4719BF92C_zpsjhtt9kbg.jpg?1420934823008


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/FD402D39-5CD7-4799-9FB4-20471F28A553_zps6prhfcpl.jpg?1420936273152




This is the update from Mark

Head is complete with new valve guides fitted, valves checked and lapped in, all new gaskets and new manifold fitted bottom end to do next.http://www.rtoc.org/boards/images/new-smilies/smokin.gif



http://www.rtoc.org/boards/images/statusicon/user_online.gif http://www.rtoc.org/boards/images/buttons/report.gif (http://www.rtoc.org/boards/report.php?p=389856)

andreas395
05-05-2015, 19:33
As i said earlier car back a few weeks ago after engine rebuild and new turbo, cams etc fitted. I first done about 90 miles then changed the oil and filter plus I fitted a gold plug the magnet is super strong.

I then took the car for a nice drive before it went away for the winter months
Few pictures drive down to Brighton from luton then back up to my parents house in London where the 5 has a nice double garage to its self

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/54C219AC-B7DE-411A-AEDA-347B4DEAD748_zpsv6aroolk.jpg?1420935901156&1420935930434&1420936273149

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/28950FAB-6D40-4B84-B105-1F0A389288DF_zpsko5bqts7.jpg?1420935901157&1420935930434&1420936273149

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/16B35C29-5FDB-4B83-9B28-847F26A73371_zpszyfrdrkr.jpg?1420935901156&1420935930434&1420936273149

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/63DF9084-A088-4A79-B76A-ACBCB2A63684_zpser1wlxkl.jpg?1420935901157&1420935930434&1420936273149

Next was to give the car a deep clean so on Boxing Day I went all out and spent about 5 hrs on it

Months of dirt and grime http://www.rtoc.org/boards/images/new-smilies/frown.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/4F15C20D-7585-485F-9937-251F32E56781_zps4sf0itpy.jpg?1420935901156&1420935930434&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/2345D7F7-38E6-485F-9983-942D4FF6E09A_zpsvbp3xcmy.jpg?1420935901156&1420935930434&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/84FF0F5B-B690-42ED-BAF1-D1798141CD14_zpsryy2aawk.jpg?1420935901156&1420935930434&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/966C8551-26A4-4AF4-93C5-0ABABED2905B_zpsagcwn2vi.jpg?1420935901156&1420935930433&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/CD1858F5-81B1-46CF-AEF1-A8A39DDE1AF8_zpshlmmasy1.jpg?1420935901156&1420935930433&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/E86AF487-F397-4D06-AB90-E0C0FEA4FC2E_zpsv8pnhgcw.jpg?1420935901156&1420935930433&1420936273148

First i cleaned engine bay

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/FC1A2C5F-6B93-429B-A94A-B17121312363_zpschppujrq.jpg?1420935901156&1420935930433&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/BBFC8B13-5E76-4A85-8772-EDB4DBE2EDEE_zpseyqwxkss.jpg?1420935901156&1420935930433&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/9EBEC281-538B-4A05-8FC3-D2854CB64306_zpskfqx2pzo.jpg?1420935901156&1420935930433&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/437C6624-5B80-4472-B1FD-454FAFE96C67_zpsbukijupr.jpg?1420935901156&1420935930433&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/E23FDADA-7132-4CFF-BE60-E99899A5425F_zpsz6awukfd.jpg?1420935901156&1420935930433&1420936273148

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/14620F71-2282-403C-86B2-822E340B3831_zpsi9bdqsqb.jpg?1420935901156&1420935930432&1420936273147

next took off grill and washed cleaned wheels in the alley then clay bar the whole car


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/14620F71-2282-403C-86B2-822E340B3831_zpsi9bdqsqb.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/1DDDDFA6-533C-4815-A04D-06326BB4AB3F_zpsgw6f5il0.jpg


http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/80DA7A4D-ED4A-4878-94F1-F4DBF64C3B32_zpsba9g4gaz.jpg

the goods http://www.rtoc.org/boards/images/new-smilies/smokin.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/C0B68481-4539-4055-80CA-165C9B517E5E_zps9w8bur4b.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/7146252E-EA8B-49AA-B395-5E59635EA3D8_zpsvlnxrlb7.jpg

next resin polish and clean windows inside and out

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/A41683A6-EFE0-4277-8D78-A253BAECA950_zpso1zcliem.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/A22D6403-51F9-4DB0-A700-EED1785E7A84_zpsi0cu7bpq.jpg

then a final gloss wax and treat all my rubbers window sills etc

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/3CE21A6A-83F8-4F22-8E35-A53C1092D847_zpsqyxisedx.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/E1B31990-48C2-4EB1-BA1D-C15FFF62AA8F_zpsidpyvm0z.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/DF6AF260-AA48-488D-B7F4-63B0F85F6950_zps1f8euuda.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/3681A3BC-DC96-498C-ADE3-4CDB8A1EF861_zpshggyh9zb.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/EE1B1E93-06EF-433C-A44E-A0223FE15352_zps4vecuau2.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/B0EA2271-4429-4D79-96F2-8A0015D21787_zps88v9wqnn.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/B6C120CB-11D7-4477-B23A-FE0F23AC99D5_zpstzfdjmcq.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/B6C120CB-11D7-4477-B23A-FE0F23AC99D5_zpstzfdjmcq.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/5CB0FBC0-7805-4992-9203-4C3B0D99C121_zpsme7chj0t.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/849480EC-30F7-446D-8B86-2D360B48703A_zpsibccvqxa.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/C32D08FD-4B78-4310-A6E8-B8CF05A3ECD7_zpsvlwx3fap.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/05E07066-4377-4D4F-9C91-55414AB46255_zpsx1ia5qnf.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/F958FEFA-FFC1-4A4B-B28F-B2BFE3427446_zps8y8wqvqn.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/CC532C26-A7D8-44E4-A160-F9E401BD69F3_zpsvg6hwxxs.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/EC928CCE-6126-4595-9B83-C85271FDFE58_zpsomndmthl.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/C325E59D-EA7A-496E-8122-1A38629EF17A_zpsve3k4iyd.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/9F9F0A85-E5B7-4C22-A95D-85D6D17BC581_zpsqytcucvu.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/7D926486-94EB-40AC-B8FA-8A8726B5393B_zpsuxmpreyy.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/F0D06274-8403-4FFC-A988-A68192A3CF0E_zpsc2erfejk.jpg

got some damp bags for the 5 to

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/F8193448-E3DE-49C2-AC7D-9B794DADE2B7_zps7o8zfm8d.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/F6706622-9B80-4860-9F82-35EFDFC7096F_zpswxfzmz4k.jpg

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/6D3D3EF6-1138-427F-BD53-2CF729BADF5D_zpsoulnkivo.jpg

Car lock on and away for the winter.
I have done 300 miles since the engine rebuild, going to change the oil and filter again at 500 miles next year when back on road then at about 800 miles I'm going to take it back to Mark to fully build my carb and up the boost http://www.rtoc.org/boards/images/new-smilies/smile.gif

http://i1347.photobucket.com/albums/p714/dre_williams1_2/R5%20GTT/47B5E260-C96E-49F3-B6A0-D42226C7DAF0_zpsqnzsjznd.jpg

andreas395
05-05-2015, 19:36
when and picked up the car this weekend got a couple of hundred miles to do then im going to get the carb rebuild and re jetted to turn up the boost
:)

ianbirch
05-05-2015, 20:07
Nice update Andreas....very enjoyable....:)

Cheers Ian

andreas395
05-05-2015, 20:36
Thanks mate got my Williams 2 back on the weekend to that's now at my parents in the double garage

Danno
05-05-2015, 22:51
Nice, but you've got way way way to much spare time on your hands my son:winkey::)

andreas395
12-05-2015, 05:42
Lol never enough time my friend :)