PDA

View Full Version : Breaking My Track Car (With Pics)



Squeak
11-07-2013, 11:37
UPDATE 11/07/2013

Right the time has come to break my track car:

This car has MK1, MK2 and MK3 parts


I have lots of goodies for sale and all will be listed. P.S all have done between 1000-1500 miles max unless stated.


The car is a MK2 1.2 Shell with a MK3 197 Cup Racer roll cage welded into it.
The shell shall come complete with new window screen that was fitted at the end of march (in preparation for a track day that got cancelled).
All Body panels will be left on the car apart from the front windows (as I currently have Perspex). The rear beam shall be left on the car but no front suspension shall remain.
£350

Link to shell thread

http://www.clio16valver.co.uk/forum/viewtopic.php?f=12&t=53867

The engine is a MK1 2.0 F7R Williams Engine. The mileage of the engine is approximately 72500 (have original Williams dials and documentation to prove mileage).
At 71 257 miles the following was done to the engine prior to me fitting it in the car.
Replace Cambelt and Tensioners, Water Pump, Thermostat, Spark Plugs, HT Leads, Rotary Arm, Distributor Cap, Engine Oil and Filter, Gearbox Oil,
This engine is in very good condition for its age and does not burn a lot of oil. It is a strong engine and made 171.1 hp with a custom 172 manifold and the standard Williams ECU and then 177.2hp with a chipped ecu. This engine does pull like a train and considering it is not cammed the potential is definitely there!
Parts included.
Complete Engine Minus – Gearbox, clutch, manifold, non pas bracket, water hoses, coolant bottle.
Including All Sensors, spark plug, ht leads, water pump, thermostat, rotary arm, distributor cap, Chipped ECU. PROV SOLD DEPOSIT TAKEN


Throttle Body Adaptors.
1 the worst one I made but still does the job. £25
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/616.jpg[/img (http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/616.jpg%5b/img)]

1 The one that I made on the recent batch I made £35
[img]http://i1041.photobucket.com/albums/b414/Hybrid_Squeak/50A3C9A9-BDAB-4EA4-B4A9-692F8788343E-1121-00000105916EAB99.jpg[/img (http://i1041.photobucket.com/albums/b414/Hybrid_Squeak/50A3C9A9-BDAB-4EA4-B4A9-692F8788343E-1121-00000105916EAB99.jpg%5b/img)]

1 That I made that is probably the best flowing £45
No picture as yet

Pipercross Race Filter & Phase 1 Airbox with Red Silicone Tube £45

Custom 172 Manifold made to fit an F7P / F7R £120 Fits in a MK2 shell never tested to see if it fits MK1 Shell
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/533.jpg[/img (http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/533.jpg%5b/img)]
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/534.jpg[/img (http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/534.jpg%5b/img)]
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/535.jpg[/img (http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/535.jpg%5b/img)]
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/536.jpg[/img (http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/536.jpg%5b/img)]
[img]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/537.jpg[/img (http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/537.jpg%5b/img)]


K-tec Decat (Twin Lambda) £100
Genuine Renault manifold to cat fitting it (£30 Renault) £15

Chipped Williams ECU with standard Map but raised rev limiter to 7000/71000 (tel:7000/71000) rpm £100

Ktec Stealth – Silenced. Mild Steel version and has been sprayed in black high temp paint (Has been slightly shorted to accommodate my manifold) (will check it will still fit on a Phase 1 £100

Lockable Aerocatches PROVISIONALLY SOLD DEPOSIT TAKEN
[IMG][URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/Aerocatrches_zpsd266d859.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/Aerocatrches_zpsd266d859.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/Aerocatrches_zpsd266d859.jpg.html)]

172 Mintex M1155 Brake Pads Fitted bedded in and then removed as track day got cancelled. £85 posted
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/M1155Pads_zps949984f5.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/M1155Pads_zps949984f5.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/M1155Pads_zps949984f5.jpg.html)]

172 Hubs £50 the pair (good Bearings)
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/hubs_zps0a55dc3d.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/hubs_zps0a55dc3d.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/hubs_zps0a55dc3d.jpg.html)]
172 Shafts £100 the pair
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/offsidedriveshaft_zps8acc8a03.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/offsidedriveshaft_zps8acc8a03.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/offsidedriveshaft_zps8acc8a03.jpg.html)]

172 Front Callipers £20 each
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers1_zpsa772d835.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers1_zpsa772d835.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/calipers1_zpsa772d835.jpg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers_zps41e8b8cb.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers_zps41e8b8cb.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/calipers_zps41e8b8cb.jpg.html)]
172 Polybushed ARB £50

Polybushed Exhaust Mounts £20 Inclues middle one (not pictured yet)
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/powerflexrearexhausthanger_zps0d4fb076.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/powerflexrearexhausthanger_zps0d4fb076.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/powerflexrearexhausthanger_zps0d4fb076.jpg.html)]

Squeak
11-07-2013, 11:37
Poly Carb Windows made by ACW Plastics! Fronts with sliders 4 small holes. (Few marks from sliding back and forth). Rears with 2 holes each side for pop out vents to let air in. Black boarder kit (Started to do will need finishing) PROVISIONALLY SOLD DEPOSIT TAKEN
[URL=http://s1149.photobucket.com/user/Hybrid_Squeak1/media/1_zps1799068d.jpeg.html]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/1_zps1799068d.jpeg[/URL (http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/1_zps1799068d.jpeg%5b/IMG%5d%5b/URL)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/2_zps09e0f72e.jpeg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/2_zps09e0f72e.jpeg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/2_zps09e0f72e.jpeg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/3_zps54cb011b.jpeg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/3_zps54cb011b.jpeg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/3_zps54cb011b.jpeg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/4_zpse5f329b3.jpeg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/4_zpse5f329b3.jpeg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/4_zpse5f329b3.jpeg.html)]
Picture shows all the nuts bolts and washers needed to fit the windows. The padding to go between the shell and the rear windows. The black border paint. One has been done (may need touching up and cleaning up depending how fussy you are) and the other one will need doing. Also pictured is the 4 pop out vents for the rear windows (extra ventilation)
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/6_zps350fef60.jpeg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/6_zps350fef60.jpeg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/6_zps350fef60.jpeg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/5_zpsea2952b3.jpeg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/5_zpsea2952b3.jpeg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/5_zpsea2952b3.jpeg.html)]

T7 Lightweight heater and ducting. Everything needed to fit £110
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/heater_zps7259f842.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/heater_zps7259f842.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/heater_zps7259f842.jpg.html)]

Oz Supperleggras 15” 4 x 100 ET 37. 4 Used Toyo R888’s perfect for track (don’t think they are road legal). 2 wheels are in good condition and the other two have marks. Perfect for a set of track wheels as these are ultra light weight! Also come with Genuine Oz Spigot Rings to fit the clio centre bore (whatever it is).PROVISIONALLY SOLD DEPOSIT TAKEN
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/1_zps5f964341.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/1_zps5f964341.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/1_zps5f964341.jpg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/2_zps60a5832f.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/2_zps60a5832f.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/2_zps60a5832f.jpg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/3_zpsa0de7141.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/3_zpsa0de7141.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/3_zpsa0de7141.jpg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/4_zpsb5c6f3b9.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/4_zpsb5c6f3b9.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/4_zpsb5c6f3b9.jpg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/8_zpsa0cc4dd4.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/8_zpsa0cc4dd4.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/8_zpsa0cc4dd4.jpg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/6_zps9cdfc4b3.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/6_zps9cdfc4b3.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/6_zps9cdfc4b3.jpg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/5_zps0d906591.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/5_zps0d906591.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/5_zps0d906591.jpg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/7_zps7d600754.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/7_zps7d600754.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/7_zps7d600754.jpg.html)]

16 of these. M12 x 1.5 70mm long. £6.59 each
http://www.demon-tweeks.co.uk/motors...onversion-stud

16 of these. M12 x 1.5 60 degree taper 19mm head 27mm long. £6.43 each
http://www.demon-tweeks.co.uk/motors...open-wheel-nut

Looking for £105 delivered.

Black TRS Tow Strap x 2 £10 posted (Each)

Phase 1 Gear Stick £25
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/gearstick_zps90ba6708.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/gearstick_zps90ba6708.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/gearstick_zps90ba6708.jpg.html)]

Drilled and Grooved Front and Rear Discs (rears have good bearings) Inc Mintex Pads for the Front & Rear £100
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/frontdisk1_zps6550b69c.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/frontdisk1_zps6550b69c.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/frontdisk1_zps6550b69c.jpg.html)]
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/frontdisk2_zpse0cfa64f.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/frontdisk2_zpse0cfa64f.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/frontdisk2_zpse0cfa64f.jpg.html)]
Will get pics of rear discs soon

Mocal 13 Row oil Cooler – Thermostatic inc anti vibration bolts (Prevents cooler cracking) £135 Posted

Manual steering conversion. Column and rack. Rack has 172 arms and track rod ends £80
172 Braided Brake Lines – 3 in used condition the 4th one that is not pictured is brand new and has never been used £40 Posted
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/Brakelines_zps6ce2ebe9.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/Brakelines_zps6ce2ebe9.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/Brakelines_zps6ce2ebe9.jpg.html)]

Clio Williams Dogbone Stabiliser (Goes from dogbone mount to gearbox) £20
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/williamsstabiliser_zps004e3c40.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/williamsstabiliser_zps004e3c40.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/williamsstabiliser_zps004e3c40.jpg.html)]

Fire Extinguisher (dont think I can post) £20
[URL="http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/fireextinguisher_zps8d9adc39.jpg%5b/IMG%5d%5b/URL"]http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/fireextinguisher_zps8d9adc39.jpg[/URL (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/fireextinguisher_zps8d9adc39.jpg.html)]

​ More parts to come just need to remember them and look through the garage

Squeak
13-07-2013, 11:14
Oz Ultraleggras sold
Polycarbonate Windows sold
Aerocatches Sold
​Phase 1 Gearstick sold

Squeak
15-07-2013, 09:19
UPDATE 15/07/2013

Right the time has come to break my track car:

This car has MK1, MK2 and MK3 parts


I have lots of goodies for sale and all will be listed. P.S all have done between 1000-1500 miles max unless stated.


The car is a MK2 1.2 Shell with a MK3 197 Cup Racer roll cage welded into it.
The shell shall come complete with new window screen that was fitted at the end of march (in preparation for a track day that got cancelled).
All Body panels will be left on the car apart from the front windows (as I currently have Perspex). The rear beam shall be left on the car but no front suspension shall remain.
£350

Link to shell thread

http://www.clio16valver.co.uk/forum/viewtopic.php?f=12&t=53867

Throttle Body Adaptors.
1 the worst one I made but still does the job. £25
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/616.jpg

1 The one that I made on the recent batch I made £35
http://i1041.photobucket.com/albums/b414/Hybrid_Squeak/50A3C9A9-BDAB-4EA4-B4A9-692F8788343E-1121-00000105916EAB99.jpg

1 That I made that is probably the best flowing £45
No picture as yet

Pipercross Race Filter & Phase 1 Airbox with Red Silicone Tube £45

Custom 172 Manifold made to fit an F7P / F7R £120 Fits in a MK2 shell never tested to see if it fits MK1 Shell
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/533.jpg
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/534.jpg
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/535.jpg
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/536.jpg
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/537.jpg

K-tec Decat (Twin Lambda) £100
Genuine Renault manifold to cat fitting it (£30 Renault) £15

Chipped Williams ECU with standard Map but raised rev limiter to 7000/71000 rpm £100

Ktec Stealth – Silenced. Mild Steel version and has been sprayed in black high temp paint (Has been slightly shorted to accommodate my manifold) (will check it will still fit on a Phase 1 £100
http://s1149.photobucket.com/user/Hybrid_Squeak1/media/null_zpsb2d076a8.jpg.html

172 Mintex M1155 Brake Pads Fitted bedded in and then removed as track day got cancelled. £85 posted
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/M1155Pads_zps949984f5.jpg

172 Hubs £50 the pair (good Bearings)
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/hubs_zps0a55dc3d.jpg
172 Shafts £100 the pair
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/offsidedriveshaft_zps8acc8a03.jpg

172 Front Callipers £20 each
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers1_zpsa772d835.jpg
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/calipers_zps41e8b8cb.jpg
172 Polybushed ARB £50
http://s1149.photobucket.com/user/Hybrid_Squeak1/media/null_zps9af3d22d.jpg.html

Polybushed Exhaust Mounts £20
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/powerflexrearexhausthanger_zps0d4fb076.jpg
Middle Powerflex exhaust bracket
http://s1149.photobucket.com/user/Hybrid_Squeak1/media/null_zps698e7915.jpg.html

T7 Lightweight heater and ducting. Everything needed to fit £110
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/heater_zps7259f842.jpg

16 of these. M12 x 1.5 70mm long. £6.59 each
http://www.demon-tweeks.co.uk/motors...onversion-stud

16 of these. M12 x 1.5 60 degree taper 19mm head 27mm long. £6.43 each
http://www.demon-tweeks.co.uk/motors...open-wheel-nut

Looking for £105 delivered.

Black TRS Tow Strap x 2 £10 posted (Each)

Drilled and Grooved Front and Rear Discs (rears have good bearings) Inc Mintex Pads for the Front & Rear £100
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/frontdisk1_zps6550b69c.jpg
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/frontdisk2_zpse0cfa64f.jpg
Will get pics of rear discs soon

Mocal 13 Row oil Cooler – Thermostatic inc anti vibration bolts (Prevents cooler cracking) £135 Posted

Manual steering conversion. Column and rack. Rack has 172 arms and track rod ends £80
http://s1149.photobucket.com/user/Hybrid_Squeak1/media/null_zps9af3d22d.jpg.html

172 Braided Brake Lines – 3 in used condition the 4th one that is not pictured is brand new and has never been used £40 Posted
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/Brakelines_zps6ce2ebe9.jpg (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/Brakelines_zps6ce2ebe9.jpg.html)

Clio Williams Dogbone Stabiliser (Goes from dogbone mount to gearbox) £20
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/williamsstabiliser_zps004e3c40.jpg (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/williamsstabiliser_zps004e3c40.jpg.html)

Fire Extinguisher (dont think I can post) £20
http://i1149.photobucket.com/albums/o588/Hybrid_Squeak1/fireextinguisher_zps8d9adc39.jpg (http://s1149.photobucket.com/user/Hybrid_Squeak1/media/fireextinguisher_zps8d9adc39.jpg.html)

MK2 PH1 Headlights £40 pair
http://s1149.photobucket.com/user/Hybrid_Squeak1/media/null_zpsa4ed08bd.jpg.html

F7P/F7R Starter Motor Heatshield £15
http://s1149.photobucket.com/user/Hybrid_Squeak1/media/null_zps7e18bd49.jpg.html

Manual Steering Conversion This was run on an F7R but I believe it will fit an F4R £50
http://s1149.photobucket.com/user/Hybrid_Squeak1/media/null_zpsfcbd5b97.jpg.html

Alternator to suit manual steering conversion £50
http://s1149.photobucket.com/user/Hybrid_Squeak1/media/null_zps55167fc4.jpg.html

F7P/F7R Non Water Cooled Set Up £25
http://s1149.photobucket.com/user/Hybrid_Squeak1/media/null_zpsf5987cef.jpg.html

More parts to come just need to remember them and look through the garage

Squeak
16-07-2013, 09:44
T7 Heater SOLD!

mitnik
05-09-2016, 22:37
Do you still have the dogbone stabilizer?.

Nick