Lots of assorted parts - 16v/Williams

[bison3]

I have loads of parts stored which I have no need for anymore as I no longer use my Williams or 16v. I'll advertise them pretty cheap to help get them moving.


Mechanical:


Stainless steel midsection - £15


Standard mid section - £10


Downpipe with lambda, all fully working - £20


Radiator fan (x2) fully working - £10 each


Heater matrix - £5


Cylinder head - £5


16v Exhaust manifold -£5


Inlet manifold with TB - £10


PS reservoir - £3


Power steering pipes, both types - £10 each


PS rack - £10


Aux fuel tank with pump etc - £5


Spark plug cover, good condition - £10


Steering column, good condition, no play - £15


PH1 ECU - £25


PH2 ECU - £15


16v starter motor (x2), both fully working - £15 each


Brake calipers - £10 each


Coil pack - £5


Dogbone mounts - £5 each




Interior:


16v clocks, 1 on 121k, the other on 127k - £5 each


16v oil dials - £10


Heater dials - £5


Stereo cover - £5


PH1 16v dash top, good condition - £10


Various interior plastics etc - £5


Clear side repeaters - £5


PH1 wing trim - £10


Lockwood 16v chrome kick plates/ sill plates - £5


Spark plug cover, good condition - £10


Silver gear knob with all screws - £5


Momo pedals - £5


Wiper blades - £2 each set


Seatbelts - £5


Rear seats - £10


Exterior:


449 passenger door, few scratches without door card - £3


449 passenger door, quite good condition - £5


Black passenger side door with everything in, pretty good condition - £5




449 16v tailgate, condition not as good, with normal coloured spoiler and a http://www.clio16valver.co.uk sticker - £5


449 16v passenger side wing with ph1 16v badges and repeaters, good condition - £10


449 16v drivers side wing with ph1 16v badges and repeaters, good condition - £10


Black 16v passenger side wing, good condition - £10






449 colour coded scuttle panel - £5


Freshly primed and painted scuttle panel - £5


Headlights - £5 each


Rear lights - £5 each




Also have plenty of other various bits and bobs, especially bits of interior etc. Have most things so just send me a message to check if I have something you need in particular.


Also have for sale a Brooklands PH2 original shell with a few extras included. Offers welcome.


I can also get pictures upon request. All prices are for collection but postage is available at a small extra cost. Located in Northampton, just off the M1.

[Kris2012]

Is it a Williams downpipe? I'll take it if so.

Kris

[talkingfish]

Hi! I'll take the spark plug cover please.

[Rajk]

pm'd - dont know if you got it

interested in the doors and scuttle panels and wings and rear lighs

[bison3]

Is it a Williams downpipe? I'll take it if so.

Kris
It's a 16v I'm afraid.

Replied to all messages.

[Vandella]

where abouts you located mate? need a 449 drivers door.. but may not be able to collect..
ill happily arrange a courier..
Thanks Dan

[bison3]

Located in Northampton.

[Willbee]

Need the passenger side front wing

[Ste]

Hi I am after a few bits if you have them:


door solenoid for passenger door (i assume either will fit),
the plastic cover that fits on the rear wiper arm to hide the nut,
the smoked plastic cover that sits on the roof near the interior lights,
Both door trays (what condition are the ones you have)


Thanks


Ste

[mmoss123]

Hi, have you got the manifold heat shield and front engine cover?

[Turlough]

Hi there would you be ok if I organised a courior for cylinder head and standard center section

[willy3ams]

Looking for a set a williams calipers front and rear including carriers. Do you still have any?

[bison3]

Sent messages out to all enquiries.

[bison3]

Still have most of this stuff.

[rroymondo]

Hi, do you have the drivers side plastic williams sill cover

[bison3]

Do you mean the front passenger wing?