Williams 2 oil level guage

[fraserj30]

Hi being new to clio Williams ownership, I was wondering if someone could let me know if there is an easy fix to get the oil level guage to work. The pressure and temp work fine, but would like all three to work as they should. It's one of many things that I want to fix. But none of them detract from the joy of the drive! Thanks

[16v_paddy]

Does it go up when you 1st turn the ignition on?

[jamiecrookston83]

As paddy says. Should work on the first turn of the ignition. If not, could be the sender unit thats broken.

[Wobba]

The wiring for these dials is primitive, easy to fix. Oil level sender is at the front of the block, single wire as far as I remember, on a white squeeze plug...I think :)

[16v_paddy]

Thought the level & temp sensor was the 1 that goes at the bottom of the dipstick? 1 sensor does both jobs

[fraserj30]

Hi No it does not move when ignition first turned on. Thanks a lot for the steer on this. Will take a look at your suggestions on my car over the weekend

[adiclio16v]

Yeh level and temp combined sender although there still separate as in if one works doesn't mean it's not fuked