PDA

View Full Version : What in the Hell....



Zollo
24-08-2005, 23:41
.....is that button on the left for, next to the fogs? Anyone?

http://i6.photobucket.com/albums/y204/Zollo/IMG_19111.jpg

FATBOY
24-08-2005, 23:49
dunno mate something to do with alarm??? its normally a blank plate when it came of production line i guess! mine was a blank plate but i had my immobiliser put in where that plate is! just push key fob into contacts and away it goes.

Scott-16v!
24-08-2005, 23:54
mines got some metal nobbly bits on it inside a recessed circle, don't know what its for and ive never used it :?

Zollo
24-08-2005, 23:56
mines got some metal nobbly bits on it inside a recessed circle, don't know what its for and ive never used it :?

That'll be for an immobiliser key, like Fatboy has got. Must be an immobilised immobiliser :?

KingStromba
25-08-2005, 00:25
PMSL. You have bought a car with the built in nebuliser.

Very rare these, Came as a factory option. Whatever you do.




DONT PRESS THAT BUTTON

TriO`
25-08-2005, 00:32
why, what the hells a nebuliser????


my mates williams has got his immobliser key there...

Gav
25-08-2005, 00:49
my car has one of them also dude, next to my heater. Its for your clifford alarm.

Dont know if it does anything ive never pressed it but its defo for the alarm

KingStromba
25-08-2005, 10:24
The nebuliser is linked in the engine bay to the cam belt. Press the button and the cam belt is instantly shreaded into 1000 pieces.

David
25-08-2005, 10:31
Stromba dont think thats the case mate might be wrong but it is alarm realted cause mate had one in his Subaru when his Clifford alarm was installed.

Dont think it strips the cambelt as i pressed his many a time and it didnt **** up his :lol: :lol:
Pretty certain it was a reset or sumit will find out shortly you might be right tho !!!

Winston
25-08-2005, 10:50
Something to do with a Clifford alarm lol

KingStromba
25-08-2005, 10:51
Stromba is right, its something to do with the nebuliser lol


:D

Dno194
25-08-2005, 15:21
Zollo

Its the manual over-ride for valet mode on your Clifford alarm. You turn the ignition on, enter a four digit pin (say 1234). You press the top button as many times as to represent the individual number set as your override code, then press the bottom button to enter the number. So:

1 (press top button once follwed by single press of bottom button)
2 (press top button twice followed by single press of bottom button)
3 (press top button three times followed by single press of bottom button)
4 (press top button four times followed by single press of bottom button)

The red flashing light on your dash will then stay on constantly to show you are in valet mode until you start the vehicle. handy if you lose your alarm fob.

Deano

David
25-08-2005, 15:43
Thats the one Deano thought it was sumit like that

jobs a gooden

katbloke
25-08-2005, 16:08
The nebuliser is linked in the engine bay to the cam belt. Press the button and the cam belt is instantly shreaded into 1000 pieces.

Lmao real answer is they help ya breathe easy if ya have an asthma attack or other lung problems.

Allan
25-08-2005, 17:52
arnt nebuliser's those things which turn liquids into vapor so you can breath them in i.e like those inhaller things ? or they mix oxygen into the mix or somthing like that

Zollo
25-08-2005, 18:14
Cheers Deano and everyone else, will have a look to see if I can find a code written down amongst the paper work somewhere :D

Dno194
26-08-2005, 11:06
It should be on the back cover of your clifford manual.