PDA

View Full Version : Immobiliser removal?


Wobba
26-01-2013, 17:48
Is there a known way I can bypass and completely remove the immobiliser wiring on the Williams?
Pickering
26-01-2013, 18:25
Sounds like someone's going to steal a Williams :ninja:
p4cks
26-01-2013, 19:18
Sounds like someone's going to steal a Williams :ninja:

Or having problems with the electrics on a temperamental old French car? hehe
Wobba
26-01-2013, 19:38
Hehe yea. It is being a shitter to me, misfires. I think I will just run a fuel pump bypass switch and see if that sorts it. Already bypassed the ECU relay with a switched 12v connection. No difference.
Smokey McPot
26-01-2013, 22:20
Forgive my ignorance, but if you're running a bespoke ECU, is it not already bypassed?
MatBrown
26-01-2013, 23:34
Williams are not immobilised from the factory so it will be an aftermarket Jobbie.
Wobba
27-01-2013, 01:19
Okay. Could it be that the factory alarm immobiliser are somehow connected then? Could it be that when I unplugged and cut a wire to the Cobra jobbie it could be causing this issue?