4th engine mount....

[Vandella]

hey, i have a 4th mount to put on, are there any pics to show this fitted or any old threads someone could kindly point me too.. ive had a try at searching but its seems ive found the old threads where the links dont work!! :upset2:.

Thank you all

[16v_paddy]

http://i1055.photobucket.com/albums/s505/michaelthomasadams1/2A516367-041F-463B-8843-A9099D67FE0C-1059-000000A86A275923.jpg

[Vandella]

ahh.. took me a while to spot it!! i can see clearly now! thanks paddy!!

[172lover]

http://i47.tinypic.com/ng4ym0.jpg
From my pony :)

[stevie_b]

Photo of it bolted in position on subframe off the car if that's any help?

http://i83.photobucket.com/albums/j299/2stis/subframe.jpg

[Vandella]

Nice one guys! and stevieb thats is very pretty

[northy]

Liking that lower brace steve - how is the project coming along - tracktime this year????

[stevie_b]

That's the plan! Just a few bits to fettle, but other stuff at home keeps getting in the way. Painted the whole house (rendering) and all the window frames this year so that was pretty much every dry, sunny day taken up. Didn't quite finish it before the weather turned, so another day or so to do on that when the spring comes :-( I should be out doing the car now there are less distractions (although I still have long list of other jobs to do), especially in this milder weather when its more bearable to be in an unheated garage!

[jamiecrookston83]

Is the 4th mount easily changed?

[cliokiz]

Bear in mind if you have the Williams support brace on the top gearbox mount, this uses the top bolt hole where you see the bracket bolted to on the gearbox. You'll need to do some chopping of the support brace to get it to fit if you still want to run it (i'd advise you keep it)

[elflamo]

I've removed the 4th engine mount on my willy, as it caused too much engine vibration through the car for normal (non track) use.

[Wobba]

Photo of it bolted in position on subframe off the car if that's any help?

http://i83.photobucket.com/albums/j299/2stis/subframe.jpg

I tried to find a Sparco lower brace, but can't find one :(

That is, indeed, very pretty :D

[16v_paddy]

I've removed the 4th engine mount on my willy, as it caused too much engine vibration through the car for normal (non track) use.

I think you'll find that is caused by 1 of the other mounts being worn as the 4th mount without a 5th on the opposite side causes the engine to sit at a slight angle :winkey:

[elflamo]

Nope, changed all of them at the same time....